4432EL1002A LG Dryer Drum Baffle

Step 1: Unplug the Dryer

To safely replace the 4432EL1002A LG Dryer Drum Baffle, unplug the dryer from its power source first.

Step 2: Remove the Front Panel

The front panel of the dryer should be unscrewed and removed to access the drum baffle. The screws can usually be found at the bottom of the dryer door.

Step 3: Remove the Drum Baffle

The drum baffle can usually be found inside the dryer near the back. It is usually held in place by some clips and may require a few screws to be removed first. Use a flathead screwdriver to loosen the clips, then gently pull the baffle out of the dryer.

Step 4: Install the New Drum Baffle

Once the old drum baffle is removed, slide the new one in its place. Make sure all clips and screws are tight and secure.

Step 5: Replace the Front Panel

After the new drum baffle is installed, replace the front panel of the dryer, making sure the screws are tight.

Step 6: Plug the Dryer Back In

Once the front panel is secured, plug the dryer back into its power source and test it to make sure the new drum baffle is working properly.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.