WE04X25996 GE Washer Igniter
GE - Hotpoint - RCA Dryer Gas Burner Igniter WE4X739. We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs
Weight : 1.005600 lbs
Dimension : 11.200000 x 3.900000 x 3.200000
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
GE - Hotpoint - RCA Dryer Gas Burner Igniter WE4X739. We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs
Weight : 1.005600 lbs
Dimension : 11.200000 x 3.900000 x 3.200000
Write Your Own Review
The following parts are replaced by this product
- WE4X739
- WE04X10128
- WE04X0739
- WE04X25996-24PK
1. Unplug the oven from the wall socket and locate the oven's access panel. Use a Phillips head screwdriver to remove the screws that secure the panel to the oven.
2. Locate the old igniter near one of the burners at the bottom of the oven. Disconnect the wires connecting it to the range.
3. Using pliers, remove the screws holding the old igniter in place. Carefully pull the old igniter out and replace it with the new GE WE04X25996 Igniter.
4. Reattach the wires to the new igniter, securing them firmly.
5. Replace the access panel and secure it with the screws.
6. Plug the oven back in and test to ensure the new igniter is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Locate the old igniter near one of the burners at the bottom of the oven. Disconnect the wires connecting it to the range.
3. Using pliers, remove the screws holding the old igniter in place. Carefully pull the old igniter out and replace it with the new GE WE04X25996 Igniter.
4. Reattach the wires to the new igniter, securing them firmly.
5. Replace the access panel and secure it with the screws.
6. Plug the oven back in and test to ensure the new igniter is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
