WD01X10104 GE Dishwasher Hose Clamp
The GE WD01X10104 CLAMP is the perfect solution for fastening hoses and wires together. It features a stainless steel construction that ensures a secure hold and durability that will last for years. The clamp is equipped with an adjustable knob, making it simple to adjust the tension to your desired setting. It can accommodate hoses and wires up to 1" in diameter and offers up to 4-1/4" of clearance for ease of installation. For convenience and dependability, the GE WD01X10104 CLAMP is the ideal choice for your needs. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.1295 lbs
Dimension : 6 x 6 x 0.5
The GE WD01X10104 CLAMP is the perfect solution for fastening hoses and wires together. It features a stainless steel construction that ensures a secure hold and durability that will last for years. The clamp is equipped with an adjustable knob, making it simple to adjust the tension to your desired setting. It can accommodate hoses and wires up to 1" in diameter and offers up to 4-1/4" of clearance for ease of installation. For convenience and dependability, the GE WD01X10104 CLAMP is the ideal choice for your needs. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.1295 lbs
Dimension : 6 x 6 x 0.5
Write Your Own Review
DIY: How to Replace a GE WD01X10104 Clamp
1. Gather the required tools for the job. You will need a Phillips screwdriver, a flathead screwdriver and a pair of pliers.
2. Disconnect the power to the appliance before attempting to do any work.
3. Locate the clamp which needs to be replaced. It is usually located on the lower back panel near the base of the appliance.
4. Using a Phillips screwdriver, loosen and remove the screws that attach the clamp to the appliance.
5. Once the screws have been removed, use a pair of pliers to detach the old clamp from the appliance.
6. Take out the new clamp and examine it to make sure it is compatible with your appliance.
7. Attach the new clamp to the appliance using the two screws provided. Make sure the clamp is secured in place.
8. Carefully re-attach any electrical wires or cables that were connected to the old clamp.
9. Test the appliance to make sure the new clamp is functioning properly.
10. Re-connect the power to the appliance.
Congratulations! You have successfully replaced the GE WD01X10104 Clamp.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Gather the required tools for the job. You will need a Phillips screwdriver, a flathead screwdriver and a pair of pliers.
2. Disconnect the power to the appliance before attempting to do any work.
3. Locate the clamp which needs to be replaced. It is usually located on the lower back panel near the base of the appliance.
4. Using a Phillips screwdriver, loosen and remove the screws that attach the clamp to the appliance.
5. Once the screws have been removed, use a pair of pliers to detach the old clamp from the appliance.
6. Take out the new clamp and examine it to make sure it is compatible with your appliance.
7. Attach the new clamp to the appliance using the two screws provided. Make sure the clamp is secured in place.
8. Carefully re-attach any electrical wires or cables that were connected to the old clamp.
9. Test the appliance to make sure the new clamp is functioning properly.
10. Re-connect the power to the appliance.
Congratulations! You have successfully replaced the GE WD01X10104 Clamp.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
