WB29K10024 GE Oven Burner Cap
The WB29K10024 GE Burner Cap is a heavy-duty OEM replacement part designed to fit various gas stove models. Boasting a durable construction, this product is designed to last and provide consistent performanc
Weight : 0.0618 lbs
Dimension : 3.937 x 3.4645 x 0.6299
The WB29K10024 GE Burner Cap is a heavy-duty OEM replacement part designed to fit various gas stove models. Boasting a durable construction, this product is designed to last and provide consistent performanc
Weight : 0.0618 lbs
Dimension : 3.937 x 3.4645 x 0.6299
Write Your Own Review
1. Unplug your appliance from the wall outlet before beginning any DIY repair work.
2. Locate and lift the burner cap off of your GE WB29K10024. This should be easy with a firm grip.
3. Wipe the burner clean of any excess dirt or debris accumulated over time.
4. Remove the screws holding the burner in place with a Phillips head screwdriver.
5. Carefully remove the burner and set it aside.
6. Place your new GE WB29K10024 burner cap into the spot where the old one was.
7. Secure the burner to the stove top with the screws you removed earlier. Make sure they are tight enough to hold it in place but not too tight, or you could risk stripping the screws.
8. Finish by plugging the appliance back into the wall outlet and testing the burner cap for proper operation.
Follow these simple instructions to quickly and safely replace the GE burner cap on your GE WB29K10024.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Locate and lift the burner cap off of your GE WB29K10024. This should be easy with a firm grip.
3. Wipe the burner clean of any excess dirt or debris accumulated over time.
4. Remove the screws holding the burner in place with a Phillips head screwdriver.
5. Carefully remove the burner and set it aside.
6. Place your new GE WB29K10024 burner cap into the spot where the old one was.
7. Secure the burner to the stove top with the screws you removed earlier. Make sure they are tight enough to hold it in place but not too tight, or you could risk stripping the screws.
8. Finish by plugging the appliance back into the wall outlet and testing the burner cap for proper operation.
Follow these simple instructions to quickly and safely replace the GE burner cap on your GE WB29K10024.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
