Maytag Appliance Parts Washer Dryer Combo Parts

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

Whirlpool KitchenAid Roper Amana Jenn-Air Maytag Gaffers and Sattler Magic Chef Sears Kenmore Admiral Dishwasher ERC Electronic Control Board W10285178Please Note: There is a ...Factory Core Charge that applies per the Manufacturer that is refundable when the old part is returned to us.We are a Factory Authorized Parts Distributor for Whirlpool Maytag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs. Read More Read Less

This Top Load Washer Dual Water Inlet Valve allows hot and cold water to fill in the washer during the cleaning cycle. If your washer isn’t receiving the proper amounts of c ...old and/or hot water, one or more of the solenoids in the current valve may have failed. You may also need to replace this part if you find that your washer is filling slowly, not filling at all or leaking cold water onto the floor. Replacing this part will require basic hand tools, some disassembly of the washing machine and novice repair experience. You must unplug the washing machine or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn off the hot and cold water supplies. Recommended Item: Consider replacing the Fill Hose (item 8212487RP) at the same time you complete this repair. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Top Load Washer Water Inlet Valve• Tools Needed: Multi screwdriver, standard pliers Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

The Dryer Push-to-Start Switch starts the dryer when you press and release the button. The Start Switch is located at the far left side behind the top panel of the dryer. To a ...ccess it, you'll need to remove the top panel of the dryer with a phillips-head screwdriver. Turn the Start Switch counter-clockwise, disconnecting it from the wiring harness. Replacing this part will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer Push-to-Start Switch• Tools Needed: Phillips-Head screwdriver Read More Read Less

The Dryer Door Switch Assembly senses if the door of your dryer is properly closed. If the door handle is broken or your dryer does not start as expected, then the door switch ... could be damaged or defective. Note that this part also replaces older 2-terminal switches. Two connectors are also included. Replacing this part will require basic hand tools, minor disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part. Helpful Tip: Take a digital photo of the current switch wiring configuration to aid when attaching the new part. A multimeter can be used to test the door switch for continuity before you begin this repair.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer Door Switch Assembly• Tools Needed: Multi screwdriver Read More Read Less

The Dryer Heating Element Wire Connector may need to be replaced if your dryer takes too long to dry your clothes or if your dryer is no longer producing heat. To start this r ...epair, pull the dryer away from the wall to access the back panel and remove the 9 screws holding the panel in place. Remove the wire from the heating block terminal and use your wire cutters to cut off the end of the wire near the terminal. The remove about a 1/4" of insulation from the end of the wire. Then you'll connect the new wire with the new nut to the existing wire. This kit Includes (1) wire with terminal and (1) wire nut. (2) ire connectors. Replacing this part will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part. Recommended Item: Wire Splicing Tool: 8-1/4". This stripper specializes in stripping and cutting wire. This tool is designed with a lean nose for pulling and looping wire and equipped with precision ground cutters.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• Package contains (1) Dryer Heating Element Wire Connector Kit• Tools Needed: 1/4" nut driver, wire splicing tool, wire cutters Read More Read Less

The Top Load Washer Lid Check Switch detects if the lid of the washer is open or closed and prevents the appliance from spinning or agitating if the lid isn’t secured. If yo ...ur washer won’t initiate the spin cycle, the current lid switch could be damaged and require replacement. Note that this part is the switch only; the fuse, wire harness and bracket are not included (the entire assembly is available for purchase under item WP22001682). Installing this part will require basic hand tools, some disassembly of the washing machine and novice repair experience. You must unplug the washer or shut off the house circuit breaker for the appliance before installing this part. Helpful Tips: The appearance of this part may differ from the original in your appliance, but will function the same way.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Top Load Washer Lid Check Switch• Tools Needed: Multi screwdriver Read More Read Less

W11366227 is an original equipment manufactured (OEM) part. Enhance your laundry experience with this high-quality dispenser hose, expertly designed for Whirlpool washers and ...compatible brands including Admiral, Amana, Jenn-Air, Kenmore, Kitchenaid, Magic Chef, Maytag, Norge, and Roper. This essential part ensures the optimal flow of detergent and fabric softener during wash cycles, effectively improving cleaning performance. Crafted with durability in mind, it resists wear and tear, leading to a longer lifespan and reliable operation. Installation is straightforward, allowing you to get back to your laundry tasks with ease. Perfect for anyone looking to maintain their washer’s efficiency, this hose is a vital replacement component that contributes to superior washing results. Maintain your appliance today and enjoy cleaner, fresher laundry with every load. Read More Read Less

This Dryer Drum Felt Seal is located on the bulkhead and is what seals the hot air into the dryer drum as it rotates. If hot air is leaking out of your dryer, the seal is like ...ly damaged and replacing this part may alleviate the issue. To access this part, you'll lift the top of the dryer up by releasing the spring clips on both sides with a putty knife. This seal is compatible with many different models and may fit both the front and rear. Includes 1 seal. Required adhesive not included. Replacing this part will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the appliance or shut off the house circuit breaker for the appliance before installing this part. Recommended items: High Temperature Adhesive (item WPY055980): High temperature adhesive for installing rubber and felt seals, 2 ounces. Dryer drum glide pad (item WP37001298): Drum glides help to support the front of the dryer drum as it rotates.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer Drum Felt Seal• Tools Needed: Multi screwdriver, putty knife Read More Read Less