Maytag Appliance Parts Washer Dryer Combo Parts

The Top Load Washer Tub to Pump Hose stretches from the lower tub into the drain pump and helps remove waste water from the appliance during operation. If you notice water lea ...king on the floor during the washing cycle, replacing this part may alleviate the issue. This black plastic part measures approx. 12" L. Installing this part will require basic hand tools, some disassembly of the washing machine and novice repair experience. You must unplug the washer or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn off the hot and cold water supplies. Note that you'll need to access the bottom of the appliance to replace this part. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Top Load Washer Tub to Pump Hose• Tools Needed: Multi screwdriver, standard pliers Read More Read Less

The Dryer Idler Pulley Arm attaches to the idler pulley wheel and the idler pulley wheel helps the drive belt rotate the dryer drum. The main reason you might need to replace ...this part is if the bearing is damaged. To access this part, you'll need to remove your dryer door and the front panel of your dryer. Replacing this part will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part. Recommended Items: Drive Belt (item 661570V). The drive belt is a very long, slender belt that wraps all the way around the dryer drum, around a tension pulley, and then around the drive motor pulley. If the drum will not turn when the dryer is turned on the belt is likely broken. While the dryer is disassembled, also consider replacing the idler pulley (item W10116792).Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer Idler Pulley Arm• Tools Needed: Multi screwdriver Read More Read Less

WPW10610880 has been replaced by W11429587. The W11429587 is a genuine OEM (Original Equipment Manufacturer) door catch that fits select models of Whirlpool, Maytag and Amana ...dryers. Read More Read Less

The Gas Dryer Igniter lights the gas in your dryer. If your dryer is no longer supplying heat, this part may be damaged or cracked and may need to be replaced. To access the p ...art, lift the top of the dryer by releasing the spring clips from the top panel with a putty knife. Then remove the door switch wires and the screws that release the front panel. Next, simply loosen the screw that holds in the igniter to remove it. Please note that the bracket is no longer included with this part. If your original igniter was round, also order bracket (item 37001309). Replacing this assembly will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part. Note that you cannot touch the grey part of the igniter; only handle the igniter by its white plastic covering.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Gas Dryer Igniter Kit• Tools Needed: Multi screwdriver, putty knife, 5/16" wrench Read More Read Less

WP3391912 is an original equipment manufactured (OEM) part. Ensure the optimal performance and safety of your dryer with this reliable high limit thermostat. Designed specific ...ally for Whirlpool appliances, this component plays a crucial role in regulating temperature to prevent overheating. Compatible across a wide range of brands including Admiral, Amana, Jenn-Air, Kenmore, Kitchenaid, Magic Chef, Maytag, Norge, and Roper, this part is ideal for various dryer models. With its durable construction, this thermostat not only enhances your appliance's efficiency but also extends its lifespan. Whether you’re in need of a replacement or an upgrade, this high limit thermostat provides peace of mind and dependable operation. Trust in a part that upholds Whirlpool's reputation for quality and performance. Read More Read Less

This Dryer Thermal Cut Off Fuse is a safety device designed to protect the dryer from overheating. A multimeter can be used to test the fuse. Always check the dryer venting wh ...en replacing a blown thermal fuse. The thermal cut off is located on top of the burner funnel under the dryer drum, so you'll need to remove the drum from the dryer cabinet to access the old part and replace it. Replacing this part will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer Thermal Cut Off Fuse• Tools Needed: Multi screwdriver, putty knife, 5/16" nut driver Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

The Dryer Thermal Fuse shuts off the motor in an electric dryer when the appliance overheats. If your dryer won't start or will run but no longer heat, replacing this part may ... alleviate the issue. Note that the thermal fuse cannot be reset. Fuses may blow due to a clogged dryer vent, so make sure you clean out this vent when installing the new part. The fuse is located behind the lower front access panel of the dryer. For easier access, you may want to remove the dryer drum behind the entire front panel. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer Thermal Fuse• Tools Needed: Multi screwdriver, 1/4" nut driver Read More Read Less

This Top Load Washer Leveling Leg is a white plastic part that allows your appliance to sit perfectly flat. Install the new leveling leg and test to see if you have it adjuste ...d properly by putting the appliance on all four legs. Adjust the new part in or out as required if your washer is unsteady. Note that you may need assistance tilting and balancing the appliance while completing this repair. Transfer the locking nut from the current leveling leg onto the new item before installation. Replacing this part will not require any tools, disassembly or repair experience. Recommended Accessory: You may need a new locking nut (item WP3359452) to complete this repair if the one on the appliance’s current leveling leg is rusted to the part and cannot to be removed. Helpful Tip: We recommend checking the other three leveling legs on your appliance in case they are also damaged or worn and require replacement. We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Top Load Washer Leveling Leg• No tools required for installation Read More Read Less

These Washer Fill Hoses feature a space-saving 90-deg elbow and can be used to fill the washer with both hot and cold water. The part includes (2) high-quality nylon-braided h ...oses with (4) Hydro-Blue Steel anti-corrosive couplings with pre-installed EPDM washers. The hoses measure 6' L and feature a large diameter design for maximum water flow and 1700-PSI burst strength. This is an accessory that can be used across several brands; check to see if your model number is compatible. Replacing this accessory will require basic hand tools, but no disassembly of the appliance or repair experience. You must unplug the washing machine or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn off your hot and cold water supplies. Helpful Tip: We recommend replacing your washing machine’s inlet hoses every 5 years to reduce the risk of hose failure and leaks.Part Specification• This product is a Factory Certified Accessory. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• Package contains (2) Washer Fill Hoses• Tools Needed: Standard pliers Read More Read Less