WPW10279866 Whirlpool Refrigerator Inlet Valve
Part #: WPL WPW10279866
The Whirlpool WPW10279866 VALVE-INLT is the ideal solution for controlling the incoming water supply to your washer. This valve is designed to be used in Whirlpool and Kenmore direct-drive washing machines. It allows you to control the flow of water into your tub and helps to prevent flooding. The valve is made with reliable, corrosion-resistant plastic construction, so you can trust that it will hold up against harsh water conditions. With easy installation, this high-quality washer part is sure to make your laundry day a breeze! We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.4288 lbs
Dimension : 4.3307 x 4.2125 x 3.2677
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The Whirlpool WPW10279866 VALVE-INLT is the ideal solution for controlling the incoming water supply to your washer. This valve is designed to be used in Whirlpool and Kenmore direct-drive washing machines. It allows you to control the flow of water into your tub and helps to prevent flooding. The valve is made with reliable, corrosion-resistant plastic construction, so you can trust that it will hold up against harsh water conditions. With easy installation, this high-quality washer part is sure to make your laundry day a breeze! We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.4288 lbs
Dimension : 4.3307 x 4.2125 x 3.2677
Write Your Own Review
The following parts are replaced by this product
- W10279866
DIY Guide: How to Replace a Whirlpool WPW10279866 VALVE-INLT
To replace a Whirlpool WPW10279866 VALVE-INLT, you'll need a few basic tools and some basic DIY experience. Follow the steps below for a successful swap.
1. Unplug the appliance and turn off the water supply. Disconnect the water supply lines from the back of the washing machine.
2. Remove the top panel of the machine by unscrewing the screws located at the back of the washer.
3. Locate the valve-inlet. This piece is usually found near the bottom of the appliance, close to the water inlet valve.
4. Unscrew the two screws that are connecting the valve-inlet to the washer. You may need to trace the wires back to ensure that you're correctly removing the right part.
5. Lift the valve-inlet out and disconnect the two wires by removing the terminal clip.
6. Install the new valve-inlet in the reverse order of the removal steps above. Ensure that you're threading the screws in securely and firmly pushing the terminal clips connected to the wires into their corresponding slots.
7. Reconnect the water supply lines to the back of the washer, plug in the machine and turn on the water supply. Your Whirlpool WPW10279866 VALVE-INLT is now successfully replaced.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
To replace a Whirlpool WPW10279866 VALVE-INLT, you'll need a few basic tools and some basic DIY experience. Follow the steps below for a successful swap.
1. Unplug the appliance and turn off the water supply. Disconnect the water supply lines from the back of the washing machine.
2. Remove the top panel of the machine by unscrewing the screws located at the back of the washer.
3. Locate the valve-inlet. This piece is usually found near the bottom of the appliance, close to the water inlet valve.
4. Unscrew the two screws that are connecting the valve-inlet to the washer. You may need to trace the wires back to ensure that you're correctly removing the right part.
5. Lift the valve-inlet out and disconnect the two wires by removing the terminal clip.
6. Install the new valve-inlet in the reverse order of the removal steps above. Ensure that you're threading the screws in securely and firmly pushing the terminal clips connected to the wires into their corresponding slots.
7. Reconnect the water supply lines to the back of the washer, plug in the machine and turn on the water supply. Your Whirlpool WPW10279866 VALVE-INLT is now successfully replaced.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.