WPW10240513 Whirlpool Strike
The Top Load Washer Lid Switch Strike is mounted on the lid of your washer and engages with the lid switch. If your appliance won't process through the wash cycles, replacing this part may alleviate the issue. Replacing this part will require no disassembly or repair experience. You must unplug the appliance or shut off the house circuit breaker before installing.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Load Washer Lid Switch Strike
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Load Washer Lid Switch Strike
• Tools Needed: Multi screwdriver
Weight : 0.0216 lbs
Dimension : 2.75 x 1.375 x 0.625
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The Top Load Washer Lid Switch Strike is mounted on the lid of your washer and engages with the lid switch. If your appliance won't process through the wash cycles, replacing this part may alleviate the issue. Replacing this part will require no disassembly or repair experience. You must unplug the appliance or shut off the house circuit breaker before installing.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Load Washer Lid Switch Strike
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Load Washer Lid Switch Strike
• Tools Needed: Multi screwdriver
Weight : 0.0216 lbs
Dimension : 2.75 x 1.375 x 0.625
Write Your Own Review
The following parts are replaced by this product
- W10240513
Installing a Replacement Whirlpool WPW10240513 STRIKE
If you’re looking for DIY instructions on replacing the Whirlpool WPW10240513 STRIKE, then you’ve come to the right place. This guide will provide step by step instructions on how to replace the Whirlpool WPW10240513 STRIKE.
Tools Needed
- Phillips Head Screwdriver
- Flathead Screwdriver
- Wire Strippers
- Wrench
- Safety Glasses
Step 1: Turn off power and water supply.
Before you start any work, it is important that you turn off power and water supply to the appliance. This can usually be done by turning off the circuit breaker or unplugging the appliance. It’s also a good idea to shut off the water supply.
Step 2: Remove the existing strike.
Using a flathead screwdriver, remove the existing strike. There may be screws holding it in place that you need to unscrew.
Step 3: Disconnect the wires.
You will need to disconnect the wires from the existing strike. Use wire strippers to carefully remove the wires.
Step 4: Install the new strike.
Once the wires have been disconnected, you can install the new strike. Carefully align the strike and then use a Phillips head screwdriver to attach it to the door.
Step 5: Reconnect the wires.
Use the wire strippers to reconnect the wires to the new strike. Make sure all connections are secure before moving on to the next step.
Step 6: Test the strike.
Once all connections have been made, test the strike by powering on the appliance and checking if the strike is working properly.
Step 7: Replace any washers or gaskets.
Use a wrench to replace any washers or gaskets that may have come off with the old strike.
Step 8: Check that all screws are secure.
Once all washers and gaskets have been replaced, check that all screws are tightened and secure.
Following these steps should help you easily replace the Whirlpool WPW10240513 STRIKE. Remember to wear safety glasses throughout the entire process to protect your eyes from any debris. If you have any questions or concerns, contact a professional for assistance.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
If you’re looking for DIY instructions on replacing the Whirlpool WPW10240513 STRIKE, then you’ve come to the right place. This guide will provide step by step instructions on how to replace the Whirlpool WPW10240513 STRIKE.
Tools Needed
- Phillips Head Screwdriver
- Flathead Screwdriver
- Wire Strippers
- Wrench
- Safety Glasses
Step 1: Turn off power and water supply.
Before you start any work, it is important that you turn off power and water supply to the appliance. This can usually be done by turning off the circuit breaker or unplugging the appliance. It’s also a good idea to shut off the water supply.
Step 2: Remove the existing strike.
Using a flathead screwdriver, remove the existing strike. There may be screws holding it in place that you need to unscrew.
Step 3: Disconnect the wires.
You will need to disconnect the wires from the existing strike. Use wire strippers to carefully remove the wires.
Step 4: Install the new strike.
Once the wires have been disconnected, you can install the new strike. Carefully align the strike and then use a Phillips head screwdriver to attach it to the door.
Step 5: Reconnect the wires.
Use the wire strippers to reconnect the wires to the new strike. Make sure all connections are secure before moving on to the next step.
Step 6: Test the strike.
Once all connections have been made, test the strike by powering on the appliance and checking if the strike is working properly.
Step 7: Replace any washers or gaskets.
Use a wrench to replace any washers or gaskets that may have come off with the old strike.
Step 8: Check that all screws are secure.
Once all washers and gaskets have been replaced, check that all screws are tightened and secure.
Following these steps should help you easily replace the Whirlpool WPW10240513 STRIKE. Remember to wear safety glasses throughout the entire process to protect your eyes from any debris. If you have any questions or concerns, contact a professional for assistance.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
