WPW10183369 Whirlpool Burner Cap
The Range Surface Burner Cap, Black fits on top of the burner head and is also called the inner spreader. The burner cap protects the burner head from spills and helps spread out the burner flame for even heating. This black cap measures approximately 3" in diameter and is intended for the left front or right rear burner. Replacing this part will require no disassembly or repair experience.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Range Surface Burner Cap, Black
• No tools required for installation
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Range Surface Burner Cap, Black
• No tools required for installation
Weight : 0.225400 lbs
Dimension : 7.204700 x 4.803100 x 0.905500
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The Range Surface Burner Cap, Black fits on top of the burner head and is also called the inner spreader. The burner cap protects the burner head from spills and helps spread out the burner flame for even heating. This black cap measures approximately 3" in diameter and is intended for the left front or right rear burner. Replacing this part will require no disassembly or repair experience.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Range Surface Burner Cap, Black
• No tools required for installation
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Range Surface Burner Cap, Black
• No tools required for installation
Weight : 0.225400 lbs
Dimension : 7.204700 x 4.803100 x 0.905500
Write Your Own Review
The following parts are replaced by this product
- W10183369
Replacing the Whirlpool WPW10183369 CAP-BURNER
DIY Instructions
1. Safety first: Before beginning any appliance repair, be sure to unplug the appliance and shut off all power sources.
2. Remove the old CAP-BURNER: Remove the old CAP-BURNER from the burner by loosening the screws that secure it. Pull out the CAP-BURNER and save the screws for reattachment later.
3. Clean the area: Using a damp cloth, be sure to clean the area around the burner before adding the new CAP-BURNER. This will ensure a secure fit and better functioning.
4. Install the new CAP-BURNER: Place the CAP-BURNER into position over the burner. Secure the CAP-BURNER with the saved screws.
5. Test the appliance: Once all screws have been fastened, reattach the power source and test your appliance to make sure that it works properly.
Following these simple steps will help you successfully replace the Whirlpool WPW10183369 CAP-BURNER on your own. If you’re ever in doubt about your repair process, be sure to contact an experienced technician for assistance.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
DIY Instructions
1. Safety first: Before beginning any appliance repair, be sure to unplug the appliance and shut off all power sources.
2. Remove the old CAP-BURNER: Remove the old CAP-BURNER from the burner by loosening the screws that secure it. Pull out the CAP-BURNER and save the screws for reattachment later.
3. Clean the area: Using a damp cloth, be sure to clean the area around the burner before adding the new CAP-BURNER. This will ensure a secure fit and better functioning.
4. Install the new CAP-BURNER: Place the CAP-BURNER into position over the burner. Secure the CAP-BURNER with the saved screws.
5. Test the appliance: Once all screws have been fastened, reattach the power source and test your appliance to make sure that it works properly.
Following these simple steps will help you successfully replace the Whirlpool WPW10183369 CAP-BURNER on your own. If you’re ever in doubt about your repair process, be sure to contact an experienced technician for assistance.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
