WP8181694 Whirlpool Washer Inlet Valve
This Top Load Washer Water Inlet Valve lets the hot and cold water into your washing machine and distributes it around to the dispensers. If the valve is leaking or the solenoids are damaged and water isn't coming in, replacing this part may alleviate these issues. Usually, a long or slow fill cycle is often due to a restricted water valve. To access the part, after shutting off the water supply, remove the hot and cold fill hoses (usually labeled "H" and "C") at the back of the machine from the valve. Be sure to set a towel down to catch any water. You'll then remove the top panel of the washer. Please note: The valve should never be disassembled and cleaned, only replaced. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also make sure you turn off the hot and cold water supplies. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner Tablets* (item W10135699) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Load Washer Water Inlet Valve
• Tools Needed: Multi screwdriver, putty knife, pliers, and channel locks
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Load Washer Water Inlet Valve
• Tools Needed: Multi screwdriver, putty knife, pliers, and channel locks
Weight : 0.9177 lbs
Dimension : 5.8661 x 4.8031 x 4.5275
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This Top Load Washer Water Inlet Valve lets the hot and cold water into your washing machine and distributes it around to the dispensers. If the valve is leaking or the solenoids are damaged and water isn't coming in, replacing this part may alleviate these issues. Usually, a long or slow fill cycle is often due to a restricted water valve. To access the part, after shutting off the water supply, remove the hot and cold fill hoses (usually labeled "H" and "C") at the back of the machine from the valve. Be sure to set a towel down to catch any water. You'll then remove the top panel of the washer. Please note: The valve should never be disassembled and cleaned, only replaced. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also make sure you turn off the hot and cold water supplies. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner Tablets* (item W10135699) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Load Washer Water Inlet Valve
• Tools Needed: Multi screwdriver, putty knife, pliers, and channel locks
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Load Washer Water Inlet Valve
• Tools Needed: Multi screwdriver, putty knife, pliers, and channel locks
Weight : 0.9177 lbs
Dimension : 5.8661 x 4.8031 x 4.5275
Write Your Own Review
The following parts are replaced by this product
- 8181694
DIY: How to Replace the Whirlpool WP8181694 Water Valve
Replacing the Whirlpool WP8181694 valve yourself is a great way to save money on costly repairs and keep your home’s plumbing in top condition. Follow these simple steps to replace your valve quickly and easily.
Tools needed:
- Adjustable wrench
- Socket wrench
- Screwdriver
Step 1: Turn off the water supply to the valve. Locate the shut-off valve for the water line that feeds the valve and turn it off.
Step 2: Disconnect the water line from the old valve. Use an adjustable wrench to loosen the connection. Once loosened, pull the water line out of the valve.
Step 3: Remove the mounting screws from the old valve. Use a socket wrench to loosen and remove the mounting screws that hold the valve in place.
Step 4: Install the new valve. Place the new valve into the mounting bracket and secure it with the screws you removed from the old valve.
Step 5: Reconnect the water line to the new valve. Using the adjustable wrench, tighten the connection securely.
Step 6: Turn on the water supply. Turn the shut-off valve counterclockwise to turn the water back on. Check the connections to make sure there are no leaks.
That’s all there is to it! Replacing the Whirlpool WP8181694 valve is an easy project that can be completed in just a few minutes. With the right tools and a few basic instructions, you can have your plumbing running like new in no time!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing the Whirlpool WP8181694 valve yourself is a great way to save money on costly repairs and keep your home’s plumbing in top condition. Follow these simple steps to replace your valve quickly and easily.
Tools needed:
- Adjustable wrench
- Socket wrench
- Screwdriver
Step 1: Turn off the water supply to the valve. Locate the shut-off valve for the water line that feeds the valve and turn it off.
Step 2: Disconnect the water line from the old valve. Use an adjustable wrench to loosen the connection. Once loosened, pull the water line out of the valve.
Step 3: Remove the mounting screws from the old valve. Use a socket wrench to loosen and remove the mounting screws that hold the valve in place.
Step 4: Install the new valve. Place the new valve into the mounting bracket and secure it with the screws you removed from the old valve.
Step 5: Reconnect the water line to the new valve. Using the adjustable wrench, tighten the connection securely.
Step 6: Turn on the water supply. Turn the shut-off valve counterclockwise to turn the water back on. Check the connections to make sure there are no leaks.
That’s all there is to it! Replacing the Whirlpool WP8181694 valve is an easy project that can be completed in just a few minutes. With the right tools and a few basic instructions, you can have your plumbing running like new in no time!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
