WP67004977 Whirlpool Refrigerator Door Hinge Bushing
WP67004977 is an original equipment manufactured (OEM) part. Ensure the smooth operation of your Whirlpool refrigerator with this essential door hinge bushing. Designed for durability and compatibility, this part is ideal for various brands, including Admiral, Amana, Jenn-Air, Kenmore, Kitchenaid, Magic Chef, Maytag, Norge, Roper, and Whirlpool itself. A high-quality hinge bushing is vital for maintaining proper door alignment, preventing issues like gaps or leaks that can compromise energy efficiency and food preservation. This replacement part is easy to install, making it a practical choice for DIY repairs. Trust in the reliability of this component to keep your refrigerator functioning optimally and to safeguard your food storage needs. Keep your appliance running like new with this indispensable part.
Weight : 0.007200 lbs
Dimension : 1.000000 x 0.870000 x 0.870000
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
WP67004977 is an original equipment manufactured (OEM) part. Ensure the smooth operation of your Whirlpool refrigerator with this essential door hinge bushing. Designed for durability and compatibility, this part is ideal for various brands, including Admiral, Amana, Jenn-Air, Kenmore, Kitchenaid, Magic Chef, Maytag, Norge, Roper, and Whirlpool itself. A high-quality hinge bushing is vital for maintaining proper door alignment, preventing issues like gaps or leaks that can compromise energy efficiency and food preservation. This replacement part is easy to install, making it a practical choice for DIY repairs. Trust in the reliability of this component to keep your refrigerator functioning optimally and to safeguard your food storage needs. Keep your appliance running like new with this indispensable part.
Weight : 0.007200 lbs
Dimension : 1.000000 x 0.870000 x 0.870000
Write Your Own Review
The following parts are replaced by this product
- C8964401
- 10961001
- 4343945
- C8965901
- 67003368
- 67004977
- 8208208
1. Gather the Tools and Parts Needed - Begin by gathering the necessary tools and parts to replace the Whirlpool WP67004977 BUSHING-DRAIN. This should include gloves, safety glasses, a bucket, a drain pan, pliers, a screwdriver, a new Whirlpool WP67004977 BUSHING-DRAIN, and pipe-joint compound.
2. Turn Off the Power - Make sure to turn off the power to the dishwasher before beginning the repair. Unplug the appliance from the wall or turn off the circuit breaker that supplies power to the dishwasher.
3. Disconnect the Drain Hose - Make sure to use gloves for this step. Locate the drain hose connected to the dishwasher, and disconnect it from the sink's drain pipe. Place a drain pan underneath the hose to catch any remaining water from the drain.
4. Remove the Old Bushing - Use a flathead screwdriver to remove the old bushing. Carefully unscrew the screw holding the bushing in place, and then lift the bushing off of the drain line.
5. Clean the Pipe - Before installing the new bushing, make sure to clean the pipe. Wipe down the pipe with a damp cloth to remove any debris that may be trapped in the threads.
6. Apply Pipe Compound - Next, apply some pipe-joint compound to the threads of the pipe. This will help create a better seal when the new bushing is installed.
7. Install the New Bushing - Take the new Whirlpool WP67004977 BUSHING-DRAIN and carefully thread it onto the pipe. Make sure to tighten the screw firmly to ensure a secure fit.
8. Reconnect the Drain Hose - Reconnect the drain hose to the drain pipe, making sure it is secured tightly.
9. Turn on Power - Finally, turn the power back on to the dishwasher, and test the new bushing to ensure it is functioning properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Turn Off the Power - Make sure to turn off the power to the dishwasher before beginning the repair. Unplug the appliance from the wall or turn off the circuit breaker that supplies power to the dishwasher.
3. Disconnect the Drain Hose - Make sure to use gloves for this step. Locate the drain hose connected to the dishwasher, and disconnect it from the sink's drain pipe. Place a drain pan underneath the hose to catch any remaining water from the drain.
4. Remove the Old Bushing - Use a flathead screwdriver to remove the old bushing. Carefully unscrew the screw holding the bushing in place, and then lift the bushing off of the drain line.
5. Clean the Pipe - Before installing the new bushing, make sure to clean the pipe. Wipe down the pipe with a damp cloth to remove any debris that may be trapped in the threads.
6. Apply Pipe Compound - Next, apply some pipe-joint compound to the threads of the pipe. This will help create a better seal when the new bushing is installed.
7. Install the New Bushing - Take the new Whirlpool WP67004977 BUSHING-DRAIN and carefully thread it onto the pipe. Make sure to tighten the screw firmly to ensure a secure fit.
8. Reconnect the Drain Hose - Reconnect the drain hose to the drain pipe, making sure it is secured tightly.
9. Turn on Power - Finally, turn the power back on to the dishwasher, and test the new bushing to ensure it is functioning properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
