W11457241 Whirlpool Drip Pan Kit

DIY: How to Replace a Whirlpool W11457241 PAN-DRIP

Replacing a damaged or corrupt PAN-DRIP in your Whirlpool W11457241 can seem daunting, but with the right tools and instructions, it is a relatively easy task. Follow these steps to complete the repair.

Tools Needed:
• Phillips head screwdriver
• Flat head screwdriver
• Pliers
• Replacement PAN-DRIP

Instructions:
1. Shut off the power to the washer by unplugging the appliance from the electrical outlet.
2. Place a towel on the floor beneath the washer drum to catch any water that may escape during the repair.
3. Open the washing machine's lid and locate the PAN-DRIP. It should be located underneath the control console near the bottom of the machine.
4. Use a Phillips head screwdriver to remove the screws securing the PAN-DRIP to the washer.
5. Using pliers, pull out the worn PAN-DRIP and discard.
6. Install the new PAN-DRIP into place, securing it with the screws you removed.
7. Reconnect the power to the washer. Test the repair by running a cycle before use.

Congratulations, you have successfully replaced the Whirlpool W11457241 PAN-DRIP!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.