W11084656 Whirlpool Dishwasher Pump Motor
Pump motor works with some Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models of dishwashers.
Weight : 3.597100 lbs
Dimension : 9.750000 x 5.250000 x 9.500000
Pump motor works with some Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models of dishwashers.
Weight : 3.597100 lbs
Dimension : 9.750000 x 5.250000 x 9.500000
Write Your Own Review
Replacing the W11084656 Whirlpool Dishwasher Pump Motor
Tools Needed:
• Screwdrivers
• Pliers
• Socket wrench with sockets
Instructions:
1. Unplug the Whirlpool dishwasher from the electrical outlet and shut off the water supply.
2. Remove the bottom kick plate at the base of the dishwasher. This will give you access to the dishwasher pump motor.
3. Use a socket wrench and the appropriate sockets to remove the mounting screws that hold the dishwasher pump motor in place.
4. Disconnect the wiring harness that connects to the dishwasher pump motor.
5. Remove the dishwasher pump motor and discard.
6. Install the new dishwasher pump motor making sure to connect the wiring harness correctly.
7. Secure the dishwasher pump motor in place with the mounting screws.
8. Replace the bottom kick plate.
9. Plug in the dishwasher and turn on the water supply.
10. Test the dishwasher for proper operation.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Tools Needed:
• Screwdrivers
• Pliers
• Socket wrench with sockets
Instructions:
1. Unplug the Whirlpool dishwasher from the electrical outlet and shut off the water supply.
2. Remove the bottom kick plate at the base of the dishwasher. This will give you access to the dishwasher pump motor.
3. Use a socket wrench and the appropriate sockets to remove the mounting screws that hold the dishwasher pump motor in place.
4. Disconnect the wiring harness that connects to the dishwasher pump motor.
5. Remove the dishwasher pump motor and discard.
6. Install the new dishwasher pump motor making sure to connect the wiring harness correctly.
7. Secure the dishwasher pump motor in place with the mounting screws.
8. Replace the bottom kick plate.
9. Plug in the dishwasher and turn on the water supply.
10. Test the dishwasher for proper operation.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
