5701M760-60 Whirlpool Electronic Control Board
5701M760-60 Whirlpool Electronic Control Board (Black)
Weight : 3.237400 lbs
Dimension : 15.250000 x 5.250000 x 5.750000
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
5701M760-60 Whirlpool Electronic Control Board (Black)
Weight : 3.237400 lbs
Dimension : 15.250000 x 5.250000 x 5.750000
Write Your Own Review
DIY Guide: How to Replace a Whirlpool 5701M760-60 CNTRL-ELEC Part
Are you having trouble with your Whirlpool 5701M760-60 CNTRL-ELEC? Don’t worry, replacing this part is easy and can be done by almost anyone. With the help of this guide, you will be able to replace the part in no time.
What You Will Need:
-New Whirlpool 5701M760-60 CNTRL-ELEC Part
-Screwdriver
-Safety Goggles
Instructions:
1.Turn off the power to the appliance. To ensure your safety, unplug the appliance from the wall or switch off the circuit breaker. Failure to do so could result in electric shock or injury.
2.Remove the screws securing the control panel to the back of the appliance. Depending on the model, screws may be located at the top and/or bottom of the panel.
3.Carefully pull the control panel away from the appliance. The wires connecting the control panel to the appliance may still be attached. Disconnect the wires gently to avoid damage.
4.After disconnecting the wires, you should now be able to access the old part. Gently remove the old part and discard it.
5.Install the new part by following the steps in reverse. Be sure to connect the wires correctly and to adjust any settings necessary for proper operation.
6.Secure the control panel in place with the screws.
7.Restore power to the appliance. Make sure that all settings are as they should be.
8.Test the appliance to make sure that the replacement part is working properly.
Congratulations! You have successfully replaced a Whirlpool 5701M760-60 CNTRL-ELEC part.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Are you having trouble with your Whirlpool 5701M760-60 CNTRL-ELEC? Don’t worry, replacing this part is easy and can be done by almost anyone. With the help of this guide, you will be able to replace the part in no time.
What You Will Need:
-New Whirlpool 5701M760-60 CNTRL-ELEC Part
-Screwdriver
-Safety Goggles
Instructions:
1.Turn off the power to the appliance. To ensure your safety, unplug the appliance from the wall or switch off the circuit breaker. Failure to do so could result in electric shock or injury.
2.Remove the screws securing the control panel to the back of the appliance. Depending on the model, screws may be located at the top and/or bottom of the panel.
3.Carefully pull the control panel away from the appliance. The wires connecting the control panel to the appliance may still be attached. Disconnect the wires gently to avoid damage.
4.After disconnecting the wires, you should now be able to access the old part. Gently remove the old part and discard it.
5.Install the new part by following the steps in reverse. Be sure to connect the wires correctly and to adjust any settings necessary for proper operation.
6.Secure the control panel in place with the screws.
7.Restore power to the appliance. Make sure that all settings are as they should be.
8.Test the appliance to make sure that the replacement part is working properly.
Congratulations! You have successfully replaced a Whirlpool 5701M760-60 CNTRL-ELEC part.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
