PA Categories

• This EDR6D1 Water Filter (Dark Blue) is specifically designed to diminish up to 99% of lead, ensuring enhanced safety and purity for your drinking water. • Tes ...ted and certified, it effectively eliminates 27 types of contaminants including lead, pesticides, pharmaceuticals, and waterborne parasites, meeting NSF standards 401, 53, and 42. • Engineered to provide water that is not only clean but also has a fresh and pure taste. • Each EVERYDROP filter replaces 1,500 plastic water bottles saved, making it an environmentally conscious option. • Used in top freezer refrigerators. Filter compartment is in the bottom left corner of the refrigerator. • Certified to fit these leading refrigerator brands: Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper. • For the best quality water, it's recommended to replace the filter every six months or 120 gallons to maximize contaminant reduction. Read More Read Less

This Range Surface Burner Control Switch is a replacement part that operates your appliance's surface element, turning it off and on and regulating its heat intensity. This sw ...itch (also called the infinite switch) is for an 8-in burner, 8.9 - 11.0 amps, and sends voltage to the surface element coil. If your element remains at high heat or doesn’t turn on at all, replacing this part may alleviate these issues. Replacing this part will require basic hand tools, some disassembly of the range and novice repair experience. You must unplug the range or shut off the house circuit breaker for the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Surface Burner Control Switch• Tools Needed: Multi screwdriver, needle-nose pliers and standard pliers Read More Read Less

The Electric Range Surface Burner Control Switch is a replacement part that operates the appliance’s surface element, turning it off and on and regulating the heat intensity .... If your element remains at high heat or doesn’t turn on at all, the surface element switch (also called the infinite switch) may be damaged and need replacement. Installing this part will require basic hand tools, minor disassembly of the range and novice repair experience. Remember to unplug the range or shut off the house circuit breaker for the appliance before installing this item. Helpful Tip: Taking a digital photograph of the current wiring connections before replacing this part is advisable to aid with proper installation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Electric Range Surface Burner Control Switch• Tools Needed: Multi screwdriver Read More Read Less

The SxS Refrigerator Water Filter Housing is a white plastic part that surrounds and protects the appliance’s water filter and connects the water lines to the water filter. ...To access the part, unscrew the water filter counter-clockwise and remove it. Then slide the old cover off. Hook the new cover onto each hinge pin, and then re-install the filter by turning it clockwise. Replacing this part will require basic hand tools, some disassembly of the refrigerator and intermediate repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part. Also turn off the refrigerator’s water supply before you begin.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) SxS Refrigerator Water Filter Housing• Tools Needed: Multi screwdriver Read More Read Less

This Range Element Receptacle and Wire Kit connects the surface elements of your range to the wiring harness. This kit includes (2) brackets (you'll only use one that matches ...your receptacle),(2) wires, (2) wire nuts, (2) pieces of heat-shrink wrap, and the receptacle. If your element is not heating, the connections may have shorted out. To access the part, remove the element that isn't working properly from your range, and the drip pan. Lift the top of the range and unscrew the old receptacle block. Replacing this part will require basic hand tools, some disassembly of the range and novice repair experience. You must unplug the range or shut off the house circuit breaker for the appliance before installing this part. Recommended Item: Wire Splicing Tool, 8-1/4". This stripper specializes in stripping and cutting wire. This tool is designed with a lean nose for pulling and looping wire and equipped with precision ground cutters.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Range Element Receptacle and Wire Kit• Tools Needed: Multi screwdriver, wire strippers, heat gun Read More Read Less

This Trash Compactor Drive Gear Kit fits on the motor shaft and engages the gear to drive the chain. This kit comes with both gears, pin springs, c spring, ram stop and ram ca ...m. Instruction sheet included. If the gear is worn out or damaged, the trash compactor will make a loud sound and no longer operate correctly. When placing the compactor on its side, be sure to protect your flooring. Replacing this part will require basic hand tools, some disassembly of the trash compactor and novice repair experience. You must unplug the compactor or shut off the house circuit breaker for the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Trash Compactor Drive Gear Kit• Tools Needed: Multi screwdriver, 3/8" socket wrench, punch, hammer, tape, and grease Read More Read Less

This Range Element Receptacle and Wire Kit connects the surface elements of your range to the wiring harness. This kit includes (2) brackets (you'll only use one that matches ...your receptacle), (2) wires, (2) wire nuts, (2) pieces of heat-shrink wrap, and the receptacle. If your element is not heating properly or works intermittently, replacing this part may alleviate these issues. To access the part, remove the element that isn't working properly from your range, and the drip pan. Lift the top of the range and unscrew the old receptacle block. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Range Element Receptacle and Wire Kit• Tools Needed: Multi screwdriver Read More Read Less

This everydrop® Ice Filter is used in 50 LB. Ice Makers. This NSF certified filter reduces chlorine taste and odor and scale build up. Replace every 2,000 gallons (7571 liter ...s) or 9 months to ensure clean safe drinking water. The contaminants or other substances removed or reduced by this water filter are not necessarily in all users water.Part Specification• Filters should be changed every 9 months Read More Read Less

Hood filter works with some Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models of stoves / ovens / ranges.

This Gas Oven Igniter Assembly will replace a broken bake or broil igniter in your gas range. You may need this part if the element no longer lights, or if the igniter of your ... oven glows for more than 90 seconds without lighting the gas flame – this indicates that the igniter is too weak to properly open the valve to allow the gas to feed through. Note that the igniter must glow white hot to properly light the oven; if it glows red or orange it is not functioning properly. Replacing this part will require basic hand tools, some disassembly of the oven and novice repair experience. You must unplug the oven or shut off the house circuit breaker for the appliance before installing this part. Also make sure to turn off the gas valve before the repair. Helpful Tip: You may need a Wire Splicer (item 3527618) to attach the connector from the old part to the new one so you can complete the installation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Gas Oven Igniter Assembly• Tools Needed: Multi screwdriver Read More Read Less