AGU72925524 LG Dryer Top Plate Assembly
Top Plate Assembly works with some LG models of Dryers
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Top Plate Assembly works with some LG models of Dryers
Write Your Own Review
The following parts are replaced by this product
- AGU72925502
DIY Guide to Replacing the LG Dryer Top Plate Assembly (AGU72925524)
Replacing your LG dryer’s top plate assembly can be a straightforward task. Follow this comprehensive guide to replacing your AGU72925524 LG dryer top plate assembly yourself and save time and money.
Tools and Materials Needed:
• Phillips screwdriver
• ¼†nut driver
• Top plate assembly (AGU72925524)
Step 1: Unplug your dryer from its power source.
Step 2: Remove the control panel on your LG dryer by using your Phillips screwdriver to unscrew the two screws located on either side of the dryer’s control console.
Step 3: Carefully lift the control panel up and away from the top of the dryer. This will reveal the existing top plate assembly.
Step 4: Remove the two mounting screws located on either side of the existing top plate assembly with your ¼†nut driver.
Step 5: Carefully lift the top plate assembly off of the dryer and set to the side.
Step 6: Place the new top plate assembly (AGU72925524) onto the dryer.
Step 7: Secure the new top plate assembly to the dryer by securing the mounting screws you removed earlier.
Step 8: Reinstall the control panel by aligning it properly with the top of the dryer and securing it with the two screws.
Step 9: Plug the dryer back into its power source.
You have now successfully replaced the LG dryer's top plate assembly (AGU72925524)!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing your LG dryer’s top plate assembly can be a straightforward task. Follow this comprehensive guide to replacing your AGU72925524 LG dryer top plate assembly yourself and save time and money.
Tools and Materials Needed:
• Phillips screwdriver
• ¼†nut driver
• Top plate assembly (AGU72925524)
Step 1: Unplug your dryer from its power source.
Step 2: Remove the control panel on your LG dryer by using your Phillips screwdriver to unscrew the two screws located on either side of the dryer’s control console.
Step 3: Carefully lift the control panel up and away from the top of the dryer. This will reveal the existing top plate assembly.
Step 4: Remove the two mounting screws located on either side of the existing top plate assembly with your ¼†nut driver.
Step 5: Carefully lift the top plate assembly off of the dryer and set to the side.
Step 6: Place the new top plate assembly (AGU72925524) onto the dryer.
Step 7: Secure the new top plate assembly to the dryer by securing the mounting screws you removed earlier.
Step 8: Reinstall the control panel by aligning it properly with the top of the dryer and securing it with the two screws.
Step 9: Plug the dryer back into its power source.
You have now successfully replaced the LG dryer's top plate assembly (AGU72925524)!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
