WH41X10096 GE Washer Drain Hose
General Electric / RCA / Hotpoint Washer External Drain Hose WH41X10096
● 5 foot long
We are a Factory Authorized Parts Distributor for General Electric. Trust us for all of your General Electric appliance parts and accessories needs.
● 5 foot long
We are a Factory Authorized Parts Distributor for General Electric. Trust us for all of your General Electric appliance parts and accessories needs.
Weight : 0.6112 lbs
Dimension : 59 x 1.2 x 1.2
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
General Electric / RCA / Hotpoint Washer External Drain Hose WH41X10096
● 5 foot long
We are a Factory Authorized Parts Distributor for General Electric. Trust us for all of your General Electric appliance parts and accessories needs.
● 5 foot long
We are a Factory Authorized Parts Distributor for General Electric. Trust us for all of your General Electric appliance parts and accessories needs.
Weight : 0.6112 lbs
Dimension : 59 x 1.2 x 1.2
Write Your Own Review
The following parts are replaced by this product
- WH41X367
- WH41X0367
1. Unplug and turn off the washing machine.
2. Remove the access panel on the back of the washer with a Phillips head screwdriver.
3. Disconnect the existing drain hose by loosening the clamp (if any) on the rear of the washer and pulling the hose out.
4. Insert the new hose into the rear of the washer, ensuring it is firmly seated.
5. Put the clamp back in position (if any) and tighten it to secure the new hose.
6. Replace the access panel and plug the washer back in.
7. Turn the washer back on and check for leaks.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Remove the access panel on the back of the washer with a Phillips head screwdriver.
3. Disconnect the existing drain hose by loosening the clamp (if any) on the rear of the washer and pulling the hose out.
4. Insert the new hose into the rear of the washer, ensuring it is firmly seated.
5. Put the clamp back in position (if any) and tighten it to secure the new hose.
6. Replace the access panel and plug the washer back in.
7. Turn the washer back on and check for leaks.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
