WE4X881 GE Dryer GE Rotary Start Switch

100% Guaranteed genuine parts logo
General Electric GE - Hotpoint - RCA Rotary Start Switch WE4X881

We are a Factory Authorized Parts Distributor for General Electric. Trust us for all of your General Electric appliance parts and accessories needs.

Weight : 0.366400 lbs
Dimension : 4.724400 x 4.212500 x 2.559000
Special Price $39.09 Regular Price $43.43 10% off
In stock
General Electric GE - Hotpoint - RCA Rotary Start Switch WE4X881

We are a Factory Authorized Parts Distributor for General Electric. Trust us for all of your General Electric appliance parts and accessories needs.

Weight : 0.366400 lbs
Dimension : 4.724400 x 4.212500 x 2.559000
Write Your Own Review
You're reviewing:WE4X881 GE Dryer GE Rotary Start Switch
Your Rating

Image size should not exceed 5 MB. File format must be JPG or PNG.

The following parts are replaced by this product

  1. WE04X10033
  2. WE04X0881
Replacing the WE4X881 GE Rotary Start Switch

Tools Needed:
• Phillips head screwdriver
• Flathead screwdriver
• Wire stripper

Instructions:

1. Disconnect the power to the appliance and make sure the switch is in the OFF position.

2. Remove any screws or bolts securing the panel covering the start switch. Depending on the model of your appliance, you may need a Phillips or flathead screwdriver to remove the panel.

3. Once the panel is off, locate the start switch. The switch will be connected to the wiring of the appliance using wires.

4. Unscrew the screws that are holding the switch in place. You may need a Phillips or flathead screwdriver to remove them.

5. Once the screws are removed, gently pull the switch away from the wiring. Take note of the wiring connections so you can reconnect the new switch in the same manner once it is installed.

6. Carefully strip the insulation from the ends of the wires. This will prepare them for the new switch.

7. Place the new switch in the same spot as the old one, and secure it with the same screws.

8. Reattach the wires to the new switch in the same way as the previous one. Make sure the wiring connections are secure and tight before moving on.

9. Put the panel back in place, and secure it with the screws or bolts.

10. Finally, turn the power back on and test the switch. Make sure the appliance turns on and off correctly before completing the replacement.

Congratulations! You’ve successfully replaced the WE4X881 GE Rotary Start Switch.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
Compatible with Compatible with