WD08X10092 GE Dishwasher Door Vent Seal
Door vent seal works with some GE, and Hotpoint models of dishwashers.
Weight : 0.0308 lbs
Dimension : 3.3464 x 2.7165 x 0.4724
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Door vent seal works with some GE, and Hotpoint models of dishwashers.
Weight : 0.0308 lbs
Dimension : 3.3464 x 2.7165 x 0.4724
Write Your Own Review
The following parts are replaced by this product
- WD08X23666
1. Unplug the dishwasher from the wall.
2. Use a flathead screwdriver to remove the screws on the dishwasher door.
3. Carefully lift off the dishwasher door and set it aside on a clean flat surface.
4. Locate the WD08X10092 GE Dishwasher Door Vent Seal, a rubber seal around the inside of the door frame.
5. Using your fingers, carefully pull off the old seal.
6. Place the new WD08X10092 GE Dishwasher Door Vent Seal, ensuring it ultimately seals the door frame.
7. Place the WD08X10032 Door Gasket onto the door and make sure it fits securely.
8. Align the door frame with the door and replace the screws.
9. Plug the dishwasher back into the wall.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Use a flathead screwdriver to remove the screws on the dishwasher door.
3. Carefully lift off the dishwasher door and set it aside on a clean flat surface.
4. Locate the WD08X10092 GE Dishwasher Door Vent Seal, a rubber seal around the inside of the door frame.
5. Using your fingers, carefully pull off the old seal.
6. Place the new WD08X10092 GE Dishwasher Door Vent Seal, ensuring it ultimately seals the door frame.
7. Place the WD08X10032 Door Gasket onto the door and make sure it fits securely.
8. Align the door frame with the door and replace the screws.
9. Plug the dishwasher back into the wall.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
