ASM BURNER CAP (5000)

Step 1: Unplug your stove. For safety, it is important to unplug your stove before doing any maintenance work.

Step 2: Locate the WB29K10022 GE Burner Cap Assembly. To find the burner cap assembly, you will need to remove the panel covering the bottom of the stove. You may need a screwdriver to open the panel.

Step 3: Remove the WB29K10022 GE Burner Cap Assembly. Use a pair of needle-nose pliers to remove the screws that hold the burner cap in place. Once the screws are removed, you can carefully pull out the burner cap from its housing.

Step 4: Clean the area. Use a cloth and mild detergent to clean the area where the burner cap assembly was. This will help ensure that the new part will fit in properly.

Step 5: Install the new WB29K10022 GE Burner Cap Assembly. Place the new burner cap in its housing and secure it with the screws you removed earlier. Make sure the screws are tight, so the burner cap won’t come loose when you use the stove.

Step 6: Plug in your stove. After ensuring the new burner cap assembly is secured properly, plug your stove back in. Turn on a burner and check to see if it is working properly.

And there you have it! Follow these steps to replace the WB29K10022 GE Burner Cap Assembly. Be sure to wear appropriate safety gear while doing any type of maintenance work on your stove.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.