WB27X10037 GE Oven Diode Cable
WB27X10037 GE Oven Diode Cable
Weight : 0.131100 lbs
Dimension : 5.314900 x 3.110200 x 1.102300
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
WB27X10037 GE Oven Diode Cable
Weight : 0.131100 lbs
Dimension : 5.314900 x 3.110200 x 1.102300
Write Your Own Review
The following parts are replaced by this product
- WB27X10330
1. To begin, unplug your oven and make sure all power to the appliance has been disconnected.
2. Open the control panel on the front of the oven. This is typically held in place by three to four screws.
3. Locate the WB27X10037 GE Diode cable and carefully unplug it from the oven.
4. Once it is disconnected, carefully wrap the diode cable around itself to prevent any damage or shocks.
5. You will then need to purchase a new WB27X10037 GE Diode cable.
6. Once the new cable has arrived, plug it into the oven. Make sure you do not over tighten the connection as this can potentially cause damage to the appliance.
7.After the cable is plugged in, reconnect the power to the oven and reassemble the control panel.
8. Test the oven to make sure everything is functioning properly.
You have now successfully replaced the WB27X10037 GE Diode Cable.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Open the control panel on the front of the oven. This is typically held in place by three to four screws.
3. Locate the WB27X10037 GE Diode cable and carefully unplug it from the oven.
4. Once it is disconnected, carefully wrap the diode cable around itself to prevent any damage or shocks.
5. You will then need to purchase a new WB27X10037 GE Diode cable.
6. Once the new cable has arrived, plug it into the oven. Make sure you do not over tighten the connection as this can potentially cause damage to the appliance.
7.After the cable is plugged in, reconnect the power to the oven and reassemble the control panel.
8. Test the oven to make sure everything is functioning properly.
You have now successfully replaced the WB27X10037 GE Diode Cable.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
