WB26X24020 GE Range Range Cooling Fan
The GE WB26X24020 Cooling Fan is perfect for your home appliance. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
The GE WB26X24020 Cooling Fan is perfect for your home appliance. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Write Your Own Review
Step 1 – Unplug the Appliance: Before replacing the GE WB26X24020 Cooling Fan Motor, make sure to unplug the appliance from its power supply.
Step 2 – Remove the Rear Panel: Carefully remove the appliance's rear panel with a Phillips head screwdriver.
Step 3 – Locate the Cooling Fan Motor: Once the rear panel is removed, locate the cooling fan motor. It will be in close proximity to the refrigerator compressor and condenser coils.
Step 4 – Remove the Old Motor: To remove the old motor, disconnect it from its power source. Then unscrew any screws that are holding it in place and carefully pull them out.
Step 5 – Install the New Motor: Once the old motor is out, install the new one. Reconnect it to its power source and secure it in place with screws.
Step 6 – Reinstall the Rear Panel: Once the new motor is in place, reinstall the rear panel. Secure it with a Phillips head screwdriver.
Step 7 – Test the Appliance: Plug the appliance back in and turn it on. Check to see if the cooling fan motor is running correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Step 2 – Remove the Rear Panel: Carefully remove the appliance's rear panel with a Phillips head screwdriver.
Step 3 – Locate the Cooling Fan Motor: Once the rear panel is removed, locate the cooling fan motor. It will be in close proximity to the refrigerator compressor and condenser coils.
Step 4 – Remove the Old Motor: To remove the old motor, disconnect it from its power source. Then unscrew any screws that are holding it in place and carefully pull them out.
Step 5 – Install the New Motor: Once the old motor is out, install the new one. Reconnect it to its power source and secure it in place with screws.
Step 6 – Reinstall the Rear Panel: Once the new motor is in place, reinstall the rear panel. Secure it with a Phillips head screwdriver.
Step 7 – Test the Appliance: Plug the appliance back in and turn it on. Check to see if the cooling fan motor is running correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
