Maytag Appliance Parts Dryer Parts

The Dryer Push-to-Start Switch starts the dryer when you press and release the button. The Start Switch is located at the far left side behind the top panel of the dryer. To a ...ccess it, you'll need to remove the top panel of the dryer with a phillips-head screwdriver. Turn the Start Switch counter-clockwise, disconnecting it from the wiring harness. Replacing this part will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer Push-to-Start Switch• Tools Needed: Phillips-Head screwdriver Read More Read Less

The Front Load Dryer Lint Screen is a white screen that provides proper air flow and operation of your dryer. After pulling the old filter out, be sure to clean the channels o ...f the lint housing before inserting the new lint screen.The filter should be cleaned before every load of laundry and replaced immediately if damaged. This a replacement lint filter with handle measures approximately 3/8" thick on the left side and 5/8" thick on the right side. Replacing your dryer’s lint filter is a quick and essential way to keep your appliance operating at optimal levels. Installing this part requires no tools, disassembly or repair experience. Recommended Tool: The Cleaning Brush (item 4210463RW) is useful to remove lint and other debris from the dryer’s venting.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Front Load Dryer Lint Screen• No tools required for installation Read More Read Less

The Dryer Heating Element is a replacement part for heating element coils that short out, causing your dryer to no longer produce the heat necessary to dry your clothes. If yo ...ur dryer is not heating as expected, replacing this part may alleviate the issue. Note that we recommend first checking for a blown thermal fuse on the blower housing before replacing the heating element. Replacing this part will require basic hand tools, some disassembly of the appliance and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Helpful Tip: The heating element and many other parts can be tested using a volt/ohm meter.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer Heating Element• Tools Needed: Multi screwdriver Read More Read Less

WPW10118347 is an original equipment manufactured (OEM) part. Ensure your dryer operates safely and efficiently with this essential gas burner and control valve designed speci ...fically for Whirlpool appliances. This high-quality component is compatible with several leading brands, including Admiral, Amana, Jenn-Air, Kenmore, Kitchenaid, Magic Chef, Maytag, Norge, and Roper, making it a versatile choice for many models. Durability and performance are paramount, and this valve meets strict industry standards for reliability. It plays a critical role in regulating gas flow, ensuring optimal function of your appliance and providing peace of mind during use. When you choose this product, you are investing in the long-term efficiency of your dryer. Maintain your appliance with this reliable part and enjoy the benefits of enhanced performance and safety. Don't let downtime disrupt your routine—make the switch today! Read More Read Less

The Electric Dryer Heating Element Assembly generates heat in the appliance during the drying cycle. This assembly includes the heating element, thermal fuse, heat shield, hea ...ter enclosure and ceramic insulators. If your dryer isn’t heating properly or generates no heat at all, the element may need to be replaced. Installing this assembly will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part. Note that you will need to transfer the high-limit thermostat from the previous heating element to the new part, or purchase a new one, to complete this repair.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer Heating Element• Tools Needed: Multi screwdriver, putty knife Read More Read Less

The Dishwasher Water Level Switch shuts the water fill valve off if the water level gets too high before the timed fill cycle ends. To access the part, remove the retainers wi ...th a flat head screwdriver and remove the bottom access panel. The Water Level Switch is located on the right hand side of your dishwasher. Replacing this part will require basic hand tools, some disassembly of the dishwasher and novice repair experience. You must unplug the dishwasher or shut off the house circuit breaker for the appliance before installing this part. Helpful Tip: We also recommend using affresh® Dishwasher Cleaner (item W10282479) to help remove limescale and mineral build-up that can be unsightly and affect your dishwasher’s performance. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dishwasher Water Level Switch• Tools Needed: Multi screwdriver Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

The Dryer Door Seal is a rubber gasket that prevents heat loss in the appliance during the drying cycle. If your dryer’s current seal is visibly damaged or the appliance is ...unable to maintain a constant temperature while operating, replacing this part may alleviate the issue. Replacing the seal will require basic hand tools, minor disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part. Required Accessory: You will need high-temperature Silicone Sealant (item WP279368) to complete this repair. Helpful Tips: This part may arrive as one piece; hold at one end and pull apart to separate before installation. Removing the dryer door before you begin will aid with proper installation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer Door Seal• Tools Needed: Multi screwdriver Read More Read Less