Maytag Appliance Parts

This Refrigerator Defrost Thermostat is a safety device that clips onto the evaporator inside the freezer. The Defrost Thermostat turns off the defrost heater in case it gets ...too warm in the freezer section. To access the part, you'll have to remove all shelving, bins, rails, and mounting clips from the inside of your freezer so you can access the back panel. Remove the back panel by removing the 6 Phillips screws. Remove the light bulb cover and then lift out the back panel. Replacing the element will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the appliance or shut off the house circuit breaker for the appliance before installing this part. Recommended Item: Wire Splicing Tool 8-1/4". This stripper specializes in stripping and cutting wire. This tool is designed with a lean nose for pulling and looping wire and equipped with precision ground cutters.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Refrigerator Defrost Thermostat• Tools Needed: Multi screwdriver, wire splicing tool Read More Read Less

This Front Load Washer Water Inlet Valve Assembly allows hot and cold water to fill in the washer. This assembly includes the hot and cold water valves with built-in thermisto ...r that monitors the water inlet temperature and relays the information back to the washer’s control board. Replacing this part will require basic hand tools, some disassembly of the washing machine and novice repair experience. You must unplug the washing machine or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn off your hot and cold water supplies. Recommended Item: Consider replacing the hot and cold Fill Hoses (item 8212487RP) at the same time as this repair. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Front Load Washer Water Inlet Valve Assembly• Tools Needed: Multi screwdriver, putty knife Read More Read Less

This Refrigerator Compressor Start Device and Capacitor attaches to the compressor and helps the compressor turn on and off while maintaining a constant temperature to keep th ...ings frozen in your freezer. The start relay boosts the compressor, and then shuts off as soon as the motor gets up to speed. The overload provides extra protection against excessive temperatures. If your refrigerator or freezer is too warm or won't turn on at all, replacing this assembly may alleviate these issues. You will need advanced mechanical training to make this repair. Specialized tools, complex testing and appliance calibration are required including but not limited to recovering and recharging the coolant in the sealed refrigeration system. We strongly recommend that you hire a qualified technician to safely install this part. Also turn off the refrigerator's water supply before you begin.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Refrigerator Compressor Start Device and Capacitor• Tools Needed: Multi screwdriver Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This Gas Oven Flat Style Igniter Kit replaces shorter or longer igniters for either bake or broil burners. If the element itself shorted out, or if the igniter of your oven gl ...ows for more than 90 seconds without lighting the gas flame, replacing this part may alleviate these issues. The igniter must glow white hot to correctly light the oven; if it glows red or orange it is not functioning as it should. Replacing this part will require basic hand tools, some disassembly of the range and novice repair experience. You must unplug the range or shut off the house circuit breaker for the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Gas Oven Flat Style Igniter Kit• Tools Needed: Multi screwdriver Read More Read Less

Ensure your refrigerator operates at peak efficiency with this high-quality gasket and seal designed for a range of leading appliance brands. Perfectly compatible with Admiral ..., Amana, Jenn-Air, Kenmore, Kitchenaid, Magic Chef, Maytag, Norge, Roper, and Whirlpool, this durable product helps prevent cold air leaks, maintaining optimal temperatures for your food and beverages. Crafted by Whirlpool, it guarantees a precise fit and long-lasting performance, making installation straightforward and hassle-free. Replace your worn or damaged seal to Maintain energy efficiency, reduce electricity bills, and prolong the life of your refrigerator. Maintain your appliance with this essential part and enjoy consistent cooling power for all your storage needs. Read More Read Less

Water inlet valve works with some Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models of washing machines.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

The Gas Dryer Valve Coil opens the gas valves while the dryer is running. If gas isn't flowing and your dryer has no heat, or it's cycling on and off repeatedly, replacing the ... coil may alleviate these issues. This set has a boost hold coil (3 prong) and secondary coil (2 prong). You can use a multimeter or VOM to test your coils to see if they are functioning properly. To access the part, remove the small access panel at the bottom front of the dryer. Replacing this part will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the appliance or shut off the house circuit breaker before installing this part. Also be sure to turn off the gas valve that’s connected to your dryer.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Gas Dryer Valve Coil Set• Tools Needed: Multi screwdriver Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.