5765M434-60 Whirlpool Control Panel
5765M434-60 Whirlpool Control Panel
Weight : 16.384900 lbs
Dimension : 33.228300 x 8.661400 x 7.913300
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
5765M434-60 Whirlpool Control Panel
Weight : 16.384900 lbs
Dimension : 33.228300 x 8.661400 x 7.913300
Write Your Own Review
The following parts are replaced by this product
- 74008803
How to Replace the Whirlpool 5765M434-60 PANL-CNTRL
This DIY guide will explain how to replace the Whirlpool 5765M434-60 PANL-CNTRL, a part found in many Whirlpool ovens. To ensure proper safety and operation of your oven, it is important to securely install this part.
Tools Needed:
• Phillips screwdriver
• Flathead screwdriver
• Socket wrench
• Gloves
Instructions:
1. Unplug your oven from the power source, and switch off the circuit breaker connected to it.
2. Remove the oven door, and locate the screws at the top and bottom of the control panel. Use a Phillips screwdriver to loosen and remove the screws.
3. Disconnect the electrical connections to the control panel. Carefully pull out the wiring harnesses, and remove any attached tapes or clips.
4. Unscrew the mounting screws that secure the control panel to the wall. Use a socket wrench or flathead screwdriver to do this.
5. Carefully pull the control panel away from the wall, and discard it. Do not forget to wear gloves for protection.
6. Get a new Whirlpool 5765M434-60 PANL-CNTRL and place it into the wall. Secure it with the mounting screws. Make sure the wiring harnesses are properly connected to the new panel.
7. Reattach the screws at the top and bottom of the panel. Also, reattach any of the tape or clips used before.
8. Turn on the circuit breaker and plug the oven back into the power source.
9. Test the Whirlpool 5765M434-60 PANL-CNTRL by turning on the oven and setting the temperature.
Congratulations! You have successfully replaced the Whirlpool 5765M434-60 PANL-CNTRL on your oven.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
This DIY guide will explain how to replace the Whirlpool 5765M434-60 PANL-CNTRL, a part found in many Whirlpool ovens. To ensure proper safety and operation of your oven, it is important to securely install this part.
Tools Needed:
• Phillips screwdriver
• Flathead screwdriver
• Socket wrench
• Gloves
Instructions:
1. Unplug your oven from the power source, and switch off the circuit breaker connected to it.
2. Remove the oven door, and locate the screws at the top and bottom of the control panel. Use a Phillips screwdriver to loosen and remove the screws.
3. Disconnect the electrical connections to the control panel. Carefully pull out the wiring harnesses, and remove any attached tapes or clips.
4. Unscrew the mounting screws that secure the control panel to the wall. Use a socket wrench or flathead screwdriver to do this.
5. Carefully pull the control panel away from the wall, and discard it. Do not forget to wear gloves for protection.
6. Get a new Whirlpool 5765M434-60 PANL-CNTRL and place it into the wall. Secure it with the mounting screws. Make sure the wiring harnesses are properly connected to the new panel.
7. Reattach the screws at the top and bottom of the panel. Also, reattach any of the tape or clips used before.
8. Turn on the circuit breaker and plug the oven back into the power source.
9. Test the Whirlpool 5765M434-60 PANL-CNTRL by turning on the oven and setting the temperature.
Congratulations! You have successfully replaced the Whirlpool 5765M434-60 PANL-CNTRL on your oven.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
