W11535094 Whirlpool Water Inlet Valve

DIY Water Inlet Valve Replacement for Whirlpool W11535094

Replacing the water inlet valve on your Whirlpool W11535094 can be done in a few easy steps. With the right tools and a bit of do-it-yourself know-how, you can change out this important component in no time. Here’s what you need to do:

1. Start by turning off the power to the appliance at the circuit breaker.

2. Disconnect the water supply lines leading to the inlet valve.

3. Remove the screws that hold the valve in place on the back of the appliance.

4. Carefully remove the old inlet valve, being careful not to damage the wiring connections.

5. Install the new Whirlpool W11535094 inlet valve, making sure to follow the manufacturer's instructions.

6. Reconnect the water supply lines to the new inlet valve.

7. Securely tighten the screws that hold the valve in place.

8. Turn the power back on to the appliance at the circuit breaker.

9. Test the new inlet valve to make sure it’s working properly.

Congratulations! You’ve successfully replaced the Whirlpool W11535094 inlet valve. This quick DIY job has saved you the time and money that it would have cost to have a professional do the repair.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.