Amana Appliance Parts

The Ice Container Assembly stores ice in the freezer compartment for dispensing. This part includes the metal auger. When removing the icemaker assembly, be sure to lift the i ...ce shut off arm up. Installing this part will require no disassembly of the appliance or repair experience. Remember to unplug the refrigerator or shut off the house circuit breaker for the appliance before installation.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Ice Container Assembly• Tools Needed: Multi screwdriver Read More Read Less

Heater kit-org-5350w/240v/60 works with some Speed Queen, and Amana models of clothes dryers.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

The SxS Refrigerator Ice Maker Assembly receives water from the water inlet, holds the water in the ice mold until it freezes and then automatically ejects the ice and refills ... again until the ice storage bin is filled. This 10-cube replacement ice maker includes the housing and complete assembly, and is compatible with several refrigerator models with in-door ice and water dispensers. Installing the part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part. Also turn off the refrigerator's water supply before you begin. Note that this assembly does not include a bail arm; remove the bail arm from the existing ice maker to reuse with the new part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) SxS Refrigerator Ice Maker Assembly• Tools Needed: Multi screwdriver Read More Read Less

The Dryer Heating Element is strung with a coiled wire made of a nickel and a chrome alloy. If your dryer isn't heating as expected, replacing this part may alleviate the issu ...e. This wire receives, but resists, a controlled electric current and as a result, the wire heats up. The heat produced is used to dry the clothes in your dryer. To determine if the original part is defective before you begin the repair, use a multimeter to test for continuity. Replacing this part will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer Heating Element Kit• Tools Needed: Multi screwdriver Read More Read Less

This Refrigerator Ice Maker Assembly is a replacement for your refrigerator's ice maker. It is intended to fit compatible Whirlpool® brand refrigerators with the ice maker in ... the door. This ice maker assembly includes the ice mold and control device. If your appliance isn't producing ice cubes as expected, replacing this part may alleviate the issue. Replacing this part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part. Also turn off the refrigerator's water supply before you begin.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Refrigerator Ice Maker Assembly• Tools Needed: Multi screwdriver Read More Read Less

The Refrigerator Ice Maker Assembly receives water from the water inlet, holds the water in the ice mold until it freezes and then automatically ejects the ice and refills aga ...in until the ice storage bin is filled. If the current ice maker in your bottom-freezer appliance is not functioning properly, you can replace the entire assembly with this kit. The assembly includes (2) module covers, (2) wire harnesses, (1) ice maker, (1) shut-off arm and installation instructions. Installing this part will require specialized tools, complicated disassembly of the refrigerator and prior repair experience. We recommend that you hire a qualified technician to install this assembly. If installing yourself, remember to unplug the refrigerator, or shut off the house circuit breaker for the appliance before beginning. We also recommend shutting off the water before installing this part. Recommended Item: You may also need to purchase a new Ice Level Arm (item 2118181 or 231180) to replace this assembly.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Refrigerator Ice Maker Assembly• Tools Needed: Specialized Tools Read More Read Less

The Dryer Heating Element Assembly generates heat in the appliance during the drying cycle. If your dryer isn’t heating properly, check for a blown thermal fuse or thermal c ...ut out. If you see a break in the coil of your appliance’s heating element, replacing this part may alleviate the issue. Replacing this part will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) Dryer Heating Element Assembly• Tools Needed: Multi screwdriver Read More Read Less

The SxS Refrigerator Ice Maker Assembly receives water from the water inlet, holds the water in the ice mold until it freezes and then automatically ejects the ice and refills ... again until the ice storage bin is filled. This 8-cube replacement ice maker is compatible with many refrigerator models with in-door ice and water dispensers. The assembly includes (3) wiring harnesses, (1) ice bin assembly, (2) mounting clips and installation instructions. If the coating of your appliance’s current ice maker is flaking off, or if components inside the assembly are no longer functioning properly, replacing the ice maker assembly may alleviate these issues. Installing the part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this part. Also turn off the refrigerator's water supply before you begin. Note that this assembly does not include abail arm; remove the bail arm from the existing ice maker to reuse with the new part.Part Specification• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• This product is a replacement part• Package contains (1) SxS Refrigerator Ice Maker Assembly• Tools Needed: Multi screwdriver Read More Read Less

This Bottom Freezer Refrigerator Ice Maker Assembly receives water from the home's water inlet valve and then holds the water inside the device until the water is frozen solid .... It then ejects the ice and refills again until the ice bucket is full. This kit includes (1) ice cube mold with control device. This is an accessory that can be used across several brands; check to see if your model number is compatible. Installing this accessory will require basic hand tools, minor disassembly of the refrigerator and novice repair experience. Be sure to unplug the refrigerator or shut off the house circuit breaker for the appliance before installing this kit. You must also turn off the water supply to the refrigerator before installation. Recommended Item: You may also need an Ice Bucket (item WPW10171529), Water Valve (item WPW10498976), Water Line Installation Kit (item 8003RP) and Fill Tube to complete this installation. Helpful Tip: Installing a Water Filter to a new or existing water supply line will improve the taste of your appliance’s water and ice.Part Specification• This product is a Factory Certified Accessory. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications• Package contains (1) Bottom Freezer Refrigerator Ice Maker Assembly• Tools Needed: Multi screwdriver, standard pliers and a small crescent wrench Read More Read Less