WP40045001 Whirlpool Idler Pulley
Whirlpool Maytag Amana Alliance Speed Queen Dryer Idler Pulley Wheel 40045001
We are a Factory Authorized Parts Distributor for Whirlpool Maytag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs.
We are a Factory Authorized Parts Distributor for Whirlpool Maytag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs.
Weight : 0.1874 lbs
Dimension : 3.6614 x 3.5433 x 2.0078
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Whirlpool Maytag Amana Alliance Speed Queen Dryer Idler Pulley Wheel 40045001
We are a Factory Authorized Parts Distributor for Whirlpool Maytag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs.
We are a Factory Authorized Parts Distributor for Whirlpool Maytag. Trust us for all of your Whirlpool Maytag appliance parts and accessories needs.
Weight : 0.1874 lbs
Dimension : 3.6614 x 3.5433 x 2.0078
Write Your Own Review
The following parts are replaced by this product
- 40045001
- 38225
Step 1: Unplug the Appliance
Unplug the appliance, and then locate the dryer’s idler pulley. This part is typically near the bottom of the machine, near the motor.
Step 2: Remove the Old Pulley
Using a screwdriver, carefully remove the screws that are holding the pulley in place. Make sure you don’t lose any of the screws as they will be needed when reinstalling the new part.
Step 3: Remove the Belt
Once the pulley has been removed, you can now take the old belt off. It may be helpful to use a pair of pliers or another tool to help you pull it off.
Step 4: Install the New Pulley
Now that the old pulley is out, you can begin to install the replacement part. First line up the new idler pulley so that it is in the correct position, then use the same screws from the previous pulley to secure it in place.
Step 5: Reinstall the Belt
Now you can take the new belt and slide it over the new pulley. Make sure that it is tight enough to keep the dryer running smoothly.
Step 6: Test the Dryer
Once the new belt is installed, you can now plug the dryer back in and test it to make sure it’s working properly. If everything is working as it should, you have successfully replaced the WP40045001 Whirlpool Idler Pulley.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Unplug the appliance, and then locate the dryer’s idler pulley. This part is typically near the bottom of the machine, near the motor.
Step 2: Remove the Old Pulley
Using a screwdriver, carefully remove the screws that are holding the pulley in place. Make sure you don’t lose any of the screws as they will be needed when reinstalling the new part.
Step 3: Remove the Belt
Once the pulley has been removed, you can now take the old belt off. It may be helpful to use a pair of pliers or another tool to help you pull it off.
Step 4: Install the New Pulley
Now that the old pulley is out, you can begin to install the replacement part. First line up the new idler pulley so that it is in the correct position, then use the same screws from the previous pulley to secure it in place.
Step 5: Reinstall the Belt
Now you can take the new belt and slide it over the new pulley. Make sure that it is tight enough to keep the dryer running smoothly.
Step 6: Test the Dryer
Once the new belt is installed, you can now plug the dryer back in and test it to make sure it’s working properly. If everything is working as it should, you have successfully replaced the WP40045001 Whirlpool Idler Pulley.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
