WP3977456 Whirlpool Start Switch
The Dryer Push-to-Start Switch starts the dryer when you press and release the button. To access this part, you'll need to remove the back top panel of the dryer with a Phillips-head screwdriver and disconnect the old switch from the wiring harness. Replacing this part will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Push-to-Start Switch
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Push-to-Start Switch
• Tools Needed: Multi screwdriver
Weight : 0.085300 lbs
Dimension : 3.070800 x 1.850300 x 2.086600
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The Dryer Push-to-Start Switch starts the dryer when you press and release the button. To access this part, you'll need to remove the back top panel of the dryer with a Phillips-head screwdriver and disconnect the old switch from the wiring harness. Replacing this part will require basic hand tools, some disassembly of the dryer and novice repair experience. You must unplug the dryer or shut off the house circuit breaker for the appliance before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Push-to-Start Switch
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Dryer Push-to-Start Switch
• Tools Needed: Multi screwdriver
Weight : 0.085300 lbs
Dimension : 3.070800 x 1.850300 x 2.086600
Write Your Own Review
The following parts are replaced by this product
- 3977456
DIY Guide to Replacing the Whirlpool WP3977456 SWITCH-PTS
If your Whirlpool WP3977456 SWITCH-PTS is malfunctioning, it’s easy to replace it with a new one. Here’s how:
Step 1: Unplug the appliance and turn off the power supply.
Step 2: Remove the top covers of the appliance and locate the switch.
Step 3: Disconnect the wires attached to the switch. You can also use a tester to check for power.
Step 4: Remove the mounting screws and take out the old switch.
Step 5: Install the new switch. Make sure it fits securely in place and the wiring is properly connected.
Step 6: Turn on the power supply and plug in the appliance.
Step 7: Test the connections using a tester to make sure everything is working.
Step 8: Replace the covers and enjoy the functioning switch!
By following these steps, you can easily replace the Whirlpool WP3977456 SWITCH-PTS. Always be careful when working with electrical parts and systems. If you have any questions or need help with replacing the switch, contact a certified technician or appliance professional.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
If your Whirlpool WP3977456 SWITCH-PTS is malfunctioning, it’s easy to replace it with a new one. Here’s how:
Step 1: Unplug the appliance and turn off the power supply.
Step 2: Remove the top covers of the appliance and locate the switch.
Step 3: Disconnect the wires attached to the switch. You can also use a tester to check for power.
Step 4: Remove the mounting screws and take out the old switch.
Step 5: Install the new switch. Make sure it fits securely in place and the wiring is properly connected.
Step 6: Turn on the power supply and plug in the appliance.
Step 7: Test the connections using a tester to make sure everything is working.
Step 8: Replace the covers and enjoy the functioning switch!
By following these steps, you can easily replace the Whirlpool WP3977456 SWITCH-PTS. Always be careful when working with electrical parts and systems. If you have any questions or need help with replacing the switch, contact a certified technician or appliance professional.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
