WP34001151 Whirlpool Water Valve
This Front Load Washer Water Inlet Valve lets the cold water into your washing machine and distributes it around to the dispensers. If the valve is leaking or the solenoids are damaged, replacing this part may alleviate the issue. A long or slow fill cycle is often due to a restricted water valve. Please note: The valve should never be disassembled and cleaned, only replaced. This part is designed to be used specifically with select front-load Maytag® washers; check to see if your model number is compatible. Replacing this part will require basic hand tools, some disassembly of the washer and novice repair experience. You must unplug the washing machine or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn the water supply off to the water and place a towel down when removing the cold fill hose from the valve. Recommended Item: Consider replacing the hot and cold Fill Hoses (item 8212487RP) at the same time you complete this repair. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Front Load Washer Water Inlet Valve
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Front Load Washer Water Inlet Valve
• Tools Needed: Multi screwdriver
Weight : 0.863300 lbs
Dimension : 4.750000 x 4.250000 x 5.880000
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This Front Load Washer Water Inlet Valve lets the cold water into your washing machine and distributes it around to the dispensers. If the valve is leaking or the solenoids are damaged, replacing this part may alleviate the issue. A long or slow fill cycle is often due to a restricted water valve. Please note: The valve should never be disassembled and cleaned, only replaced. This part is designed to be used specifically with select front-load Maytag® washers; check to see if your model number is compatible. Replacing this part will require basic hand tools, some disassembly of the washer and novice repair experience. You must unplug the washing machine or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn the water supply off to the water and place a towel down when removing the cold fill hose from the valve. Recommended Item: Consider replacing the hot and cold Fill Hoses (item 8212487RP) at the same time you complete this repair. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Front Load Washer Water Inlet Valve
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Front Load Washer Water Inlet Valve
• Tools Needed: Multi screwdriver
Weight : 0.863300 lbs
Dimension : 4.750000 x 4.250000 x 5.880000
Write Your Own Review
The following parts are replaced by this product
- 34001151
There are no associated instructions for this part.
No more associated models for this part.
