W11168387 Whirlpool Cover

DIY Guide to Replacing a Whirlpool W11168387 Cover Kit

This DIY guide will provide you with step-by-step instructions on how to replace the cover kit for a Whirlpool W11168387. Replacing the cover is relatively easy and can be done in just a few simple steps.

1. Begin by turning off the power at the main switch and unplugging the dishwasher.

2. Remove the screws from the top of the dishwasher, taking care not to damage the finish.

3. Remove the old cover kit by unlatching the clips and lifting it off the dishwasher.

4. Carefully inspect the new cover kit to make sure all pieces are included and that there are no damaged parts.

5. Place the cover kit in position and latch the clips securely.

6. Reattach the screws to the top of the dishwasher.

7. Plug the power cord back in and turn the power back on.

8. Test the dishwasher to make sure it’s working properly.

Congratulations – you have successfully replaced the cover kit for a Whirlpool W11168387!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.