W11164593 Whirlpool Refrigerator Damper Control Assembly

100% Guaranteed genuine parts logo
The Refrigerator Air Damper Control Assembly controls the cold airflow from the freezer compartment into the refrigerator compartment. If your freezer is the correct temperature but the fresh food section is too cold or not cold enough, replacing this part may alleviate the issue. The damper control is located in the freezer inside the ice maker assembly. You will need to remove the ice maker from your refrigerator to access this part. Replacing this part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the refrigerator before installing this part.

Part Specification
• This product is a Factory Certified Accessory. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Air Damper Control Assembly
• Tools Needed: Multi screwdriver

Weight : 2.295500 lbs
Dimension : 7.480300 x 6.771600 x 6.299200
Special Price $68.70 Regular Price $76.33 10% off
In stock
The Refrigerator Air Damper Control Assembly controls the cold airflow from the freezer compartment into the refrigerator compartment. If your freezer is the correct temperature but the fresh food section is too cold or not cold enough, replacing this part may alleviate the issue. The damper control is located in the freezer inside the ice maker assembly. You will need to remove the ice maker from your refrigerator to access this part. Replacing this part will require basic hand tools, some disassembly of the refrigerator and novice repair experience. You must unplug the refrigerator or shut off the house circuit breaker for the refrigerator before installing this part.

Part Specification
• This product is a Factory Certified Accessory. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Refrigerator Air Damper Control Assembly
• Tools Needed: Multi screwdriver

Weight : 2.295500 lbs
Dimension : 7.480300 x 6.771600 x 6.299200
Write Your Own Review
You're reviewing:W11164593 Whirpool Refrigerator Air Damper Control Assembly
Your Rating

Image size should not exceed 5 MB. File format must be JPG or PNG.

The following parts are replaced by this product

  1. W10362947
  2. W10749835
  3. W10837808
Replacing the Whirlpool W11164593 DIFFUSER

Instructions

1. Before beginning the replacement process, unplug the refrigerator from its power source, and shut off the water supply.

2. Locate the diffuser. The diffuser is located on the interior ceiling of your refrigerator.

3. Unscrew the diffuser. Use a Phillips-head screwdriver to unscrew the diffuser. Remove all screws and set them aside.

4. Pull down on the diffuser. Gently release it from the ceiling.

5. Disconnect the wiring harness. From the diffuser, you will see the wiring harness.

6. Twist the wiring harness counterclockwise to disengage it from the diffuser.

7. Install the new diffuser. Carefully connect the wiring harness to the new diffuser and secure the new diffuser in place with the screws removed from the old one.

8. Plug the refrigerator back in and turn on the water supply.

9. Test the diffuser. Turn the fan on to make sure the new diffuser is working properly.

Congratulations, you have now successfully replaced the Whirlpool W11164593 Diffuser!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
Compatible with Compatible with Compatible with Compatible with Compatible with Compatible with Compatible with Compatible with Compatible with Compatible with