W11160642 Whirlpool Fabric Softener Dispenser

DIY: How to Replace the Whirlpool W11160642 DISPENSER

If you need to replace your Whirlpool W11160642 DISPENSER, you can do it yourself with a few simple tools and steps. Replacing the dispenser is relatively easy, and you'll have your appliance running as good as new in no time. Before you start, make sure that you have the correct part for your specific model.

1. Unplug the refrigerator from the power source and turn off the water supply going to the dispenser.

2. Remove the screws holding the dispenser in place.

3. Carefully lift the dispenser away from the wall and disconnect the wiring harness.

4. Install the new dispenser, making sure that it's in the same position as the old one.

5. Reattach the wiring harness and secure the dispenser into place with the screws.

6. Turn the water back on and plug the refrigerator back into the power source.

7. Test the new dispenser to make sure it's working properly.

Now that you've successfully replaced your Whirlpool W11160642 DISPENSER, enjoy the convenience of having a fully-functioning appliance!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.