W10728849 Whirlpool Dishrack Roller and Adjuster
Part #: WPL W10728849
The Whirlpool W10728849 Adjuster is designed to help keep your dishwasher in perfect alignment. It's easy-to-install, durable, and long-lasting design makes it the ideal solution for keeping your dishwasher running smoothly and efficiently. The adjustable feet allow for precise height adjustments, so you can perfectly align the dishwasher with your cabinets. The corrosion-resistant stainless steel construction ensures it will last for years to come. With this adjuster, you'll be able to customize the installation of your dishwasher and get the best performance from it! We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 3.2374 lbs
Dimension : 15.25 x 5.25 x 5.75
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The Whirlpool W10728849 Adjuster is designed to help keep your dishwasher in perfect alignment. It's easy-to-install, durable, and long-lasting design makes it the ideal solution for keeping your dishwasher running smoothly and efficiently. The adjustable feet allow for precise height adjustments, so you can perfectly align the dishwasher with your cabinets. The corrosion-resistant stainless steel construction ensures it will last for years to come. With this adjuster, you'll be able to customize the installation of your dishwasher and get the best performance from it! We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 3.2374 lbs
Dimension : 15.25 x 5.25 x 5.75
Write Your Own Review
The following parts are replaced by this product
- 8268654
DIY Guide for Replacing Whirlpool W10728849 ADJUSTER
This DIY guide will help you replace the Whirlpool W10728849 ADJUSTER with ease. Follow these steps to get the job done quickly and efficiently:
Step 1: Gather all necessary tools for the job. You will need a flat-head screwdriver, a Phillips head screwdriver, and needle-nose pliers.
Step 2: Locate the Whirlpool W10728849 ADJUSTER. This part is usually mounted at the back of the washer and is typically covered by a black rubber dust cap.
Step 3: Use the flat-head screwdriver to remove the screws holding the ADJUSTER in place. If the screws are corroded, then use the needle-nose pliers to remove them.
Step 4: Once the screws are removed, gently pull the ADJUSTER out of the back of the washer.
Step 5: Place the new ADJUSTER into the same spot where the old one was located. Make sure it is lined up correctly before tightening the screws.
Step 6: Use the Phillips head screwdriver to replace the screws and secure the ADJUSTER in place.
Step 7: Test the washer to make sure the ADJUSTER is working correctly. If everything is functioning properly, your replacement should have been successful!
With this DIY guide, replacing the Whirlpool W10728849 ADJUSTER should be a breeze. Best of luck and happy fixing!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
This DIY guide will help you replace the Whirlpool W10728849 ADJUSTER with ease. Follow these steps to get the job done quickly and efficiently:
Step 1: Gather all necessary tools for the job. You will need a flat-head screwdriver, a Phillips head screwdriver, and needle-nose pliers.
Step 2: Locate the Whirlpool W10728849 ADJUSTER. This part is usually mounted at the back of the washer and is typically covered by a black rubber dust cap.
Step 3: Use the flat-head screwdriver to remove the screws holding the ADJUSTER in place. If the screws are corroded, then use the needle-nose pliers to remove them.
Step 4: Once the screws are removed, gently pull the ADJUSTER out of the back of the washer.
Step 5: Place the new ADJUSTER into the same spot where the old one was located. Make sure it is lined up correctly before tightening the screws.
Step 6: Use the Phillips head screwdriver to replace the screws and secure the ADJUSTER in place.
Step 7: Test the washer to make sure the ADJUSTER is working correctly. If everything is functioning properly, your replacement should have been successful!
With this DIY guide, replacing the Whirlpool W10728849 ADJUSTER should be a breeze. Best of luck and happy fixing!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.