W10355269 Whirlpool Cantilever Bin
The Whirlpool W10355269 BIN-CNTLVR is the perfect way to keep your fridge organized.
Weight : 1.4676 lbs
Dimension : 17 x 3.5 x 3.25
The Whirlpool W10355269 BIN-CNTLVR is the perfect way to keep your fridge organized.
Weight : 1.4676 lbs
Dimension : 17 x 3.5 x 3.25
Write Your Own Review
1. Disconnect the power source to the Whirlpool W10355269 BIN-CNTLVR before you begin the replacement process.
2. Open the front or top panel of the appliance to access the BIN-CNTLVR which should be mounted on the control board of the appliance.
3. Use a screwdriver to carefully remove the mounting screws that secure the BIN-CNTLVR to the control board. Make sure to label the screws so that you know where they go when you reinstall them.
4. Pull the BIN-CNTLVR away from the control board and disconnect any wiring harnesses connected to the unit.
5. Carefully inspect the wiring harnesses to ensure that there are no frayed or damaged wires. If you find any, replace them before continuing.
6. Take the new BIN-CNTLVR and connect the wiring harnesses to it. Carefully check the connections to make sure they are secure.
7. Place the new BIN-CNTLVR onto the control board, lining up the mounting holes with the screws.
8. Reinstall the mounting screws and make sure they are tight.
9. Reconnect the power source to the appliance and test the BIN-CNTLVR to make sure it is functioning properly.
10. Finally, reinstall the front or top panel of the appliance.
By following these DIY instructions, you should be able to safely and easily replace your Whirlpool W10355269 BIN-CNTLVR.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Open the front or top panel of the appliance to access the BIN-CNTLVR which should be mounted on the control board of the appliance.
3. Use a screwdriver to carefully remove the mounting screws that secure the BIN-CNTLVR to the control board. Make sure to label the screws so that you know where they go when you reinstall them.
4. Pull the BIN-CNTLVR away from the control board and disconnect any wiring harnesses connected to the unit.
5. Carefully inspect the wiring harnesses to ensure that there are no frayed or damaged wires. If you find any, replace them before continuing.
6. Take the new BIN-CNTLVR and connect the wiring harnesses to it. Carefully check the connections to make sure they are secure.
7. Place the new BIN-CNTLVR onto the control board, lining up the mounting holes with the screws.
8. Reinstall the mounting screws and make sure they are tight.
9. Reconnect the power source to the appliance and test the BIN-CNTLVR to make sure it is functioning properly.
10. Finally, reinstall the front or top panel of the appliance.
By following these DIY instructions, you should be able to safely and easily replace your Whirlpool W10355269 BIN-CNTLVR.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
