241872504 Frigidaire Refrigerator White Door Gasket
Part #: WCI 241872504
Door gasket, white works with some Frigidaire, Electrolux, Gibson, Kelvinator, Westinghouse, Crosley, Kenmore, and Tappan models of fridges.
Weight : 18.3245 lbs
Dimension : 44.2125 x 31.811 x 1.811
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Door gasket, white works with some Frigidaire, Electrolux, Gibson, Kelvinator, Westinghouse, Crosley, Kenmore, and Tappan models of fridges.
Weight : 18.3245 lbs
Dimension : 44.2125 x 31.811 x 1.811
Write Your Own Review
The following parts are replaced by this product
- 240514604
- 240542104
- 240542116
- ER241872504
Step 1: Prepare Your Working Area
Before beginning the door gasket replacement process, make sure you’ve cleared a large, well-lit workspace with plenty of room to move around. Also, verify that you have all the necessary tools and parts prior to replacing the gasket.
Step 2: Remove the Old Gasket
Using a flat head screwdriver, gently pry the old gasket from the door. This can be difficult at times, so be sure to apply light pressure and work slowly. Once the gasket is removed, inspect the area and clean out any debris or dirt.
Step 3: Install the New Gasket
Carefully place the 241872505 Frigidaire Door Gasket into the door and press firmly until the gasket is fully seated in the door.
Step 4: Secure the Gasket
Once the gasket is installed and properly positioned, use a drill and screws to secure the gasket to the door. Make sure to use the appropriate size drill bit and screws to ensure a secure fit.
Step 5: Test and Adjust
Open and close the door several times to make sure the gasket is properly sealed and functioning as expected. If there are any gaps or issues that need adjustments, you can use a razor blade or knife to trim the excess material.
Step 6: Clean
Wipe down the area to remove any debris left behind by the installation process and you’re ready to use your newly replaced door gasket!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Before beginning the door gasket replacement process, make sure you’ve cleared a large, well-lit workspace with plenty of room to move around. Also, verify that you have all the necessary tools and parts prior to replacing the gasket.
Step 2: Remove the Old Gasket
Using a flat head screwdriver, gently pry the old gasket from the door. This can be difficult at times, so be sure to apply light pressure and work slowly. Once the gasket is removed, inspect the area and clean out any debris or dirt.
Step 3: Install the New Gasket
Carefully place the 241872505 Frigidaire Door Gasket into the door and press firmly until the gasket is fully seated in the door.
Step 4: Secure the Gasket
Once the gasket is installed and properly positioned, use a drill and screws to secure the gasket to the door. Make sure to use the appropriate size drill bit and screws to ensure a secure fit.
Step 5: Test and Adjust
Open and close the door several times to make sure the gasket is properly sealed and functioning as expected. If there are any gaps or issues that need adjustments, you can use a razor blade or knife to trim the excess material.
Step 6: Clean
Wipe down the area to remove any debris left behind by the installation process and you’re ready to use your newly replaced door gasket!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.