PA Categories

This Top Load Washer Agitator spins your clothes properly so they can be washed. The agitator sits on top of the transmission shaft and is secured by (1) 1/4" screw that is ma ...rked by two short parallel lines at the base of the agitator. Replacing this part will require basic tools, some disassembly of the washing machine and novice repair experience. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification•  This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications•  This product is a replacement part•  Package contains (1) Top Load Washer Agitator•  Tools Needed: 1/4" nut driver Read More Read Less

This Top Load Washer Bearing Replacement Tool Kit is needed to repair install the bearing, shaft, and seal kit. Which is used on Whirlpool® and Kenmore® washing machines. Wh ...en replacing this part, if you see that your motor stator is broken, check your model number to confirm compatibility. Please remember to unplug the washer or shut off the breaker for the appliance before installing this part.Part Specification•  This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications•  This product is a replacement part•  Package contains (1) Top Load Washer Tub Bearing and Drive Shaft Kit•  Tools Needed: Specialized Tools Read More Read Less

The Whirlpool 285825 CAM-AGITATOR is a must-have part for any DIY project to replace or fix a top-loading washing machine. This durable and easy-to-install agitator cam is mad ...e from rugged plastic with a built-in nut, so it can be securely attached and provide years of reliable service. The Agitator helps keep your clothes clean and swish during the wash cycle, helping to ensure your laundry comes out as fresh and clean as possible. It also comes with specialized mounting hardware for a more secure fit. So don’t wait any longer - save time and money, and get your Whirlpool 285825 CAM-AGITATOR for your next DIY project. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs! Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

Use this Vacuum Crevice Wand to remove lint from your dryer's lint screen (for models where the screen is in the front of the dryer) and to clean your refrigerator coils or an ...y other hard to reach areas. Note that cleaning your refrigerator’s coils is part of regular maintenance for most refrigerators. Using this crevice wand once a month to remove dust and other airborne particles on your refrigerator's condenser coils may, ensure proper performance and extend the life of your refrigerator. This is an accessory that can be used with most 1-1/4" vacuums; check to see if your model number is compatible. Size: 37" L x 2" W x 1-1/2" D. Using this accessory will require no disassembly or repair experience.Part Specification•  This product is a Factory Certified Accessory. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications•  Package contains (1) Vacuum Crevice Wand•  No tools required for installation Read More Read Less

This Top Load Washer Thrust Washer sits between the upper and lower portion of the agitator on direct drive washing machines. The spacer is fitted between the agitator and the ... agitator auger and supports it as it moves. To access the part, remove the fabric softener end cap and then remove the center bolt from the agitator. After pulling the agitator out of the machine, separate the lower agitator from the upper agitator. Approx. 2-1/2" diameter. Replacing this part will require basic tools, some disassembly of the washing machine and novice repair experience. You must unplug the washing machine or shut off the house circuit breaker for the appliance before installing this part. Also make sure you turn off your hot and cold water supplies. Helpful Tip: We also recommend using affresh® Washing Machine Cleaner* (item W10501250) once a month to help reduce odor-causing residue that can build up in your washing machine's drain without proper care. *affresh® brand products are owned and distributed by Whirlpool Corporation.Part Specification•  This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications•  This product is a replacement part•  Package contains (1) Top Load Washer Thrust Washer•  Tools Needed: 7/16 in. socket range with extension, lubricant Read More Read Less

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.

This is a genuine OEM part that works for some models of Whirlpool, Jenn-Air, Kenmore, KitchenAid, Maytag, Amana, Magic Chef, Admiral, Norge, and Roper models.