203478 Speed Queen PVC Tubing 23
203478 Speed Queen Tubing PVC 23
Weight : 0.000000 lbs
203478 Speed Queen Tubing PVC 23
Weight : 0.000000 lbs
Write Your Own Review
DIY Guide to Replacing the Speed Queen 203478 TUBING PVC 23
Replacing the Speed Queen 203478 TUBING PVC 23 is a simple and straightforward do-it-yourself (DIY) repair project that can be accomplished quickly and easily by anyone. With the right tools and a few minutes of your time, you can replace this part in no time. This guide will walk you through the steps needed to complete this task.
1. Shut off power to the appliance and unplug it from the wall outlet.
2. Turn off water supply to the appliance.
3. Remove top panel of the washer to access the Speed Queen 203478 TUBING PVC 23.
4. Disconnect the old tubing from the washer by unscrewing the nut that holds it in place.
5. Measure the length of the new tubing to ensure it is the correct size.
6. Put the new tubing in place and secure it with the nut that was used to remove the old tubing.
7. Reconnect the water supply to the appliance.
8. Plug the appliance back into the wall outlet and turn on the power.
9. Replace the top panel of the washer.
Your Speed Queen 203478 TUBING PVC 23 has now been replaced. With these helpful DIY instructions the task should now be completed with no issue.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing the Speed Queen 203478 TUBING PVC 23 is a simple and straightforward do-it-yourself (DIY) repair project that can be accomplished quickly and easily by anyone. With the right tools and a few minutes of your time, you can replace this part in no time. This guide will walk you through the steps needed to complete this task.
1. Shut off power to the appliance and unplug it from the wall outlet.
2. Turn off water supply to the appliance.
3. Remove top panel of the washer to access the Speed Queen 203478 TUBING PVC 23.
4. Disconnect the old tubing from the washer by unscrewing the nut that holds it in place.
5. Measure the length of the new tubing to ensure it is the correct size.
6. Put the new tubing in place and secure it with the nut that was used to remove the old tubing.
7. Reconnect the water supply to the appliance.
8. Plug the appliance back into the wall outlet and turn on the power.
9. Replace the top panel of the washer.
Your Speed Queen 203478 TUBING PVC 23 has now been replaced. With these helpful DIY instructions the task should now be completed with no issue.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
