EBF61315802 LG Washer Lid Lock Switch Assembly
LG Electronic Clothes Washer Washing Machine Lid Lock Switch Assembly EBF61315802. The EBF61315802 Washer Door Lock ensures that the washer door is closed before it is allowed to begin.We are a Factory Authorized Distributor for LG Electronics appliance parts. Trust us for all of your LG Electronics appliance parts and accessories needs.
Weight : 0.1456 lbs
Dimension : 3.8188 x 2.9921 x 1.7716
LG Electronic Clothes Washer Washing Machine Lid Lock Switch Assembly EBF61315802. The EBF61315802 Washer Door Lock ensures that the washer door is closed before it is allowed to begin.We are a Factory Authorized Distributor for LG Electronics appliance parts. Trust us for all of your LG Electronics appliance parts and accessories needs.
Weight : 0.1456 lbs
Dimension : 3.8188 x 2.9921 x 1.7716
Write Your Own Review
Replacing the EBF61315802 LG Washer Lid Lock Switch Assembly
1. Unplug the washer from the wall outlet and shut off the water supply.
2. Open the lid of the washing machine and locate the lid lock switch assembly. It is located near the lid hinge on the back of the washer's left side.
3. Remove the screws holding the lid lock switch assembly in place.
4. Carefully pull out the old lid lock switch assembly.
5. Take the new lid lock switch assembly and slide it into the same space as the old one. Make sure to align the tabs with the slots inside the washing machine.
6. Replace the screws that were removed in step 3.
7. Plug the washer back into the wall outlet and turn on the water supply.
8. Test the lid lock switch assembly by pressing the lid switch and making sure that it is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug the washer from the wall outlet and shut off the water supply.
2. Open the lid of the washing machine and locate the lid lock switch assembly. It is located near the lid hinge on the back of the washer's left side.
3. Remove the screws holding the lid lock switch assembly in place.
4. Carefully pull out the old lid lock switch assembly.
5. Take the new lid lock switch assembly and slide it into the same space as the old one. Make sure to align the tabs with the slots inside the washing machine.
6. Replace the screws that were removed in step 3.
7. Plug the washer back into the wall outlet and turn on the water supply.
8. Test the lid lock switch assembly by pressing the lid switch and making sure that it is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
