EAU63103204 LG DC Motor
EAU63103204 LG DC Motor
Weight : 0.862900 lbs
Dimension : 5.314900 x 3.582600 x 6.299200
EAU63103204 LG DC Motor
Weight : 0.862900 lbs
Dimension : 5.314900 x 3.582600 x 6.299200
Write Your Own Review
Replacing an EAU63103204 LG DC Motor
Are you in need of replacing a DC motor in your LG washing machine but don’t know how? Look no further! This guide will provide DIY instructions on replacing the EAU63103204 LG DC Motor.
Before starting the replacement, it’s important to note that some tools and materials may be required including a pair of pliers and a new DC motor (EAU63103204). Be sure to stay safe and unplug the washing machine from the wall outlet before beginning.
Step 1: Open the Washing Machine
Begin by opening the LG washing machine to gain access to the interior. This is typically done by removing the screws from the back or side panels.
Step 2: Disconnect the Old Motor
Once inside, locate the existing DC motor and begin to disconnect it from the power source. Remove any screws holding the motor in place and detach the wiring.
Step 3: Install the New Motor
Take the new motor and place it in the same location as the old one. Secure the new motor using the screws removed from the old motor. Connect the wires to the new motor and secure them with wire ties if necessary.
Step 4: Test the New Motor
Plug the washing machine back in and quickly press the start button. The washing machine should start as normal and the new motor should be functioning. If the washing machine does not start, double-check the connections and repeat steps 3 and 4.
Your LG washing machine should now be running with the newly installed DC motor. You can now close up the washing machine and enjoy the results of your successful replacement.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Are you in need of replacing a DC motor in your LG washing machine but don’t know how? Look no further! This guide will provide DIY instructions on replacing the EAU63103204 LG DC Motor.
Before starting the replacement, it’s important to note that some tools and materials may be required including a pair of pliers and a new DC motor (EAU63103204). Be sure to stay safe and unplug the washing machine from the wall outlet before beginning.
Step 1: Open the Washing Machine
Begin by opening the LG washing machine to gain access to the interior. This is typically done by removing the screws from the back or side panels.
Step 2: Disconnect the Old Motor
Once inside, locate the existing DC motor and begin to disconnect it from the power source. Remove any screws holding the motor in place and detach the wiring.
Step 3: Install the New Motor
Take the new motor and place it in the same location as the old one. Secure the new motor using the screws removed from the old motor. Connect the wires to the new motor and secure them with wire ties if necessary.
Step 4: Test the New Motor
Plug the washing machine back in and quickly press the start button. The washing machine should start as normal and the new motor should be functioning. If the washing machine does not start, double-check the connections and repeat steps 3 and 4.
Your LG washing machine should now be running with the newly installed DC motor. You can now close up the washing machine and enjoy the results of your successful replacement.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
