4930JA3091A LG Refrigerator Water Line Connector Clip
Part #: LGE 4930JA3091A
LG Electronics Sears Kenmore Refrigerator WATER LINE CONNECTOR CLIP 4930JA3091A
Weight : 0.0002 lbs
Dimension : 0.55 x 0.65 x 0.1
LG Electronics Sears Kenmore Refrigerator WATER LINE CONNECTOR CLIP 4930JA3091A
Weight : 0.0002 lbs
Dimension : 0.55 x 0.65 x 0.1
Write Your Own Review
DIY Instructions for Replacing the LG Refrigerator Water Line Connector Clip (4930JA3091A)
Tools Needed:
-Phillips screwdriver
-Needle-nose pliers
Step 1: Unplug the refrigerator from the wall outlet and turn off the water supply to the fridge.
Step 2: Open the refrigerator door and locate the water line connector clip on the back wall.
Step 3: Use a Phillips screwdriver to remove the screws holding the clip in place.
Step 4: Remove the old clip and set it aside.
Step 5: Take the new clip and use a pair of needle-nose pliers to bend the ends of the clip around the water line.
Step 6: Secure the clip by tightening the screws.
Step 7: Turn the water supply back on and plug the fridge back into the wall outlet.
Step 8: Test the connection by slowly opening the water dispenser lever to make sure the water is flowing properly.
Follow these steps to replace the LG refrigerator water line connector clip (4930JA3091A) quickly and easily, without needing to call an expert technician.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Tools Needed:
-Phillips screwdriver
-Needle-nose pliers
Step 1: Unplug the refrigerator from the wall outlet and turn off the water supply to the fridge.
Step 2: Open the refrigerator door and locate the water line connector clip on the back wall.
Step 3: Use a Phillips screwdriver to remove the screws holding the clip in place.
Step 4: Remove the old clip and set it aside.
Step 5: Take the new clip and use a pair of needle-nose pliers to bend the ends of the clip around the water line.
Step 6: Secure the clip by tightening the screws.
Step 7: Turn the water supply back on and plug the fridge back into the wall outlet.
Step 8: Test the connection by slowly opening the water dispenser lever to make sure the water is flowing properly.
Follow these steps to replace the LG refrigerator water line connector clip (4930JA3091A) quickly and easily, without needing to call an expert technician.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.