WR60X30922 GE Refrigerator Fan Blade

100% Guaranteed genuine parts logo
Part #: GEN WR60X30922
100% Guaranteed genuine parts logo
WR60X30922 GE Refrigerator Fan Blade

Weight : 0.210100 lbs
Dimension : 4.370000 x 3.858200 x 1.732200
Special Price $49.91 Regular Price $55.46 10% off
In stock
WR60X30922 GE Refrigerator Fan Blade

Weight : 0.210100 lbs
Dimension : 4.370000 x 3.858200 x 1.732200
Write Your Own Review
You're reviewing:WR60X30922 GE Refrigerator Fan Blade
Your Rating

Image size should not exceed 5 MB. File format must be JPG or PNG.

The following parts are replaced by this product

  1. WR60X10075
  2. WR60X10208
1. First, turn off the power to your refrigerator, unplugging it from the wall socket if necessary.

2. Next, remove the access panel from the back of the refrigerator. Depending on your model, this may require removing a few screws first.

3. Once the access panel is removed, locate the evaporator fan motor and fan blade assembly.

4. Carefully disconnect the wiring harness from the evaporator fan motor.

5. Remove any screws that are securing the fan blade to the motor shaft.

6. With the screws removed, pull the fan blade away from the motor shaft.

7. Take the new fan blade and align it with the motor shaft. Make sure the fan blade is securely attached to the motor shaft.

8. Reattach the wiring harness to the evaporator fan motor.

9. Put the access panel back in place securing it with screws if necessary.

10. Plug the refrigerator back in to the wall socket, and turn the power back on.

11. Congratulations! You have just replaced the GE WR60X30922 Evaporator Fan Blade.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Compatible with