WR60X10185 GE Refrigerator Evaporator Fan Motor
Part #: GEN WR60X10185
WR60X10185 GE Refrigerator Evaporator Fan Motor
Weight : 0.509700 lbs
Dimension : 4.566900 x 3.582600 x 4.330700
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
WR60X10185 GE Refrigerator Evaporator Fan Motor
Weight : 0.509700 lbs
Dimension : 4.566900 x 3.582600 x 4.330700
Write Your Own Review
The following parts are replaced by this product
- WR60X10043
- WR60X10152
- WR60X10059
- WR60X10154
- WR60X10083
1. Disconnect power to the refrigerator before performing any repair.
2. Unscrew the back panel of the evaporator fan motor housing and remove it.
3. Carefully disconnect the wiring harness from the old fan motor and remove the three screws that secure the fan motor to the housing.
4. Carefully remove the fan blade and set it aside.
5. Place the new WR60X10185 GE Evaporator Fan Motor into the housing, replace the three screws, and connect the wiring harness.
6. Reattach the back panel to the housing and tighten the screws.
7. Reconnect the power and test the new motor. If all is well, your repair is complete.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Unscrew the back panel of the evaporator fan motor housing and remove it.
3. Carefully disconnect the wiring harness from the old fan motor and remove the three screws that secure the fan motor to the housing.
4. Carefully remove the fan blade and set it aside.
5. Place the new WR60X10185 GE Evaporator Fan Motor into the housing, replace the three screws, and connect the wiring harness.
6. Reattach the back panel to the housing and tighten the screws.
7. Reconnect the power and test the new motor. If all is well, your repair is complete.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.