WR02X12008 GE Refrigerator Evaporator Fan Grommet

Replacing the WR02X12008 WR02X24743 GE Evaporator Fan Grommet

Tools Needed:
-Flathead screwdriver
-Needlenose pliers
-WR02X12008 WR02X24743 GE Evaporator Fan Grommet replacement

Step 1: Unplug the refrigerator from the wall outlet or turn off the circuit breaker to the refrigerator to ensure a safe repair.

Step 2: Locate the evaporator fan coil in the freezer section. This is normally located behind a plastic cover and will be mounted in the interior walls of the freezer section.

Step 3: Remove the plastic cover by unscrewing the screws that hold the cover in place. With the cover removed, you should see the fan coil and the grommet.

Step 4: Using the flathead screwdriver, remove the screws that hold the grommet in place. Once all the screws are removed, the grommet will come off easily.

Step 5: Insert the new grommet into the fan coil opening. Make sure that all of the mounting holes line up with the holes on the fan coil.

Step 6: Use the needlenose pliers to secure the screws and tighten them to ensure a tight fit. Be careful not to over-tighten them, as this can damage the grommet.

Step 7: Replace the plastic cover and secure it with the screws removed in Step 3.

Step 8: Plug the refrigerator back in or turn the circuit breaker back on.

Congratulations - you have successfully replaced the WR02X12008 WR02X24743 GE Evaporator Fan Grommet!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.