WH41X24177 GE Washer Internal Drain Hose
Internal drain hose works with some GE, and Hotpoint models of washing machines.
Weight : 0.8861 lbs
Dimension : 11.4173 x 4.7244 x 2.2834
Internal drain hose works with some GE, and Hotpoint models of washing machines.
Weight : 0.8861 lbs
Dimension : 11.4173 x 4.7244 x 2.2834
Write Your Own Review
Replacing the WH41X24177 GE Washer Internal Drain Hose
1. Unplug your washer from the wall and shut off the water supply to the washer.
2. Remove the rear panel of your washer by removing any screws or clamps that may be holding it in place.
3. Locate the internal drain hose, which is behind the lower access panel.
4. Carefully detach the drain hose from the drain pump and the inlet valve.
5. Take your new WH41X24177 GE Washer Internal Drain Hose and attach one end to the drain pump and the other end to the inlet valve.
6. Reattach the rear panel of your washer and plug the power supply back in.
7. Turn on the water supply and test your washer for proper operation.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug your washer from the wall and shut off the water supply to the washer.
2. Remove the rear panel of your washer by removing any screws or clamps that may be holding it in place.
3. Locate the internal drain hose, which is behind the lower access panel.
4. Carefully detach the drain hose from the drain pump and the inlet valve.
5. Take your new WH41X24177 GE Washer Internal Drain Hose and attach one end to the drain pump and the other end to the inlet valve.
6. Reattach the rear panel of your washer and plug the power supply back in.
7. Turn on the water supply and test your washer for proper operation.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
