WH13X26535 GE Washer Water Inlet Valve
Replacing the GE WH13X26535 Water Valve Gasket Assembly will keep your washer running and performing efficiently. It also helps reduce vibration and noise caused by the washer's agitator during operation. The GE WH13X26535 Water Valve Gasket Assembly comes with all the necessary parts to complete installation, including a retainer, screws, and nuts. With simple instructions, you can have your washer back up and running in no time. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 1.0463 lbs
Dimension : 7.2047 x 5.8267 x 3.4645
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Replacing the GE WH13X26535 Water Valve Gasket Assembly will keep your washer running and performing efficiently. It also helps reduce vibration and noise caused by the washer's agitator during operation. The GE WH13X26535 Water Valve Gasket Assembly comes with all the necessary parts to complete installation, including a retainer, screws, and nuts. With simple instructions, you can have your washer back up and running in no time. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 1.0463 lbs
Dimension : 7.2047 x 5.8267 x 3.4645
Write Your Own Review
The following parts are replaced by this product
- WH13X24386
- WH13X24392
Step 1: Before starting this project, turn off the water supply and unplug the dryer.
Step 2: Take off the air chamber cover that is on the front of the dryer. This will give you access to the valve.
Step 3: Remove the two screws (or clamps) that are holding the valve in place.
Step 4: Pull out the valve and disconnect the water line from the valve.
Step 5: Install the new valve gasket assembly. Make sure it is secured firmly in place.
Step 6: Reconnect the water line to the valve and ensure no leaks.
Step 7: Reinstall the air chamber cover and screw back in the valve.
Step 8: Turn on the water supply and plug the dryer back in.
Step 9: Test the dryer to make sure everything is working properly. Replacing the GE WH13X26535 Water Valve Gasket Assembly will keep your washer running and performing efficiently.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Step 2: Take off the air chamber cover that is on the front of the dryer. This will give you access to the valve.
Step 3: Remove the two screws (or clamps) that are holding the valve in place.
Step 4: Pull out the valve and disconnect the water line from the valve.
Step 5: Install the new valve gasket assembly. Make sure it is secured firmly in place.
Step 6: Reconnect the water line to the valve and ensure no leaks.
Step 7: Reinstall the air chamber cover and screw back in the valve.
Step 8: Turn on the water supply and plug the dryer back in.
Step 9: Test the dryer to make sure everything is working properly. Replacing the GE WH13X26535 Water Valve Gasket Assembly will keep your washer running and performing efficiently.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
