WD49X25081 GE Dishwasher Fill Funnel Service Kit

How to Replace the WD49X25081 GE Dishwasher Fill Funnel Service Kit

If you own a General Electric dishwasher, then your appliance might need parts replacement from time to time. The WD49X25081 GE Dishwasher Fill Funnel Service Kit is a part that should be included in regular maintenance to ensure optimal performance and prevent any problems from occurring. This tutorial will provide step-by-step instructions on how to replace a WD49X25081 GE Dishwasher Fill Funnel Service Kit.

Tools Required:

• Screwdriver

• WD49X25081 GE Dishwasher Fill Funnel Service Kit

Instructions:

1. Unplug the dishwasher power cord from the wall socket.

2. Open the dishwasher door and locate the screws holding the cover of the fill funnel on the top of the machine.

3. Remove the screws with a screwdriver and take off the cover.

4. Pull out the old fill funnel service kit from its position in the dishwasher.

5. Take the new WD49X25081 GE Dishwasher Fill Funnel Service Kit and fit it into place.

6. Secure the fill funnel service kit by replacing the screws and putting back the cover.

7. Close the dishwasher door and plug the power cord back into the wall socket.

Your dishwasher is now ready for use. Regularly check and replace the WD49X25081 GE Dishwasher Fill Funnel Service Kit as needed to maintain optimal performance.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.