WD22X22853 GE Dishwasher Arm Spray Middle Assembly
Part #: GEN WD22X22853
Arm spray middle assembly works with some GE, and Hotpoint models of dishwashers.
Weight : 2.555 lbs
Dimension : 17.9921 x 11.1417 x 1.7716
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Arm spray middle assembly works with some GE, and Hotpoint models of dishwashers.
Weight : 2.555 lbs
Dimension : 17.9921 x 11.1417 x 1.7716
Write Your Own Review
The following parts are replaced by this product
- WD22X20189
- WD22X20241
Replacing the WD22X22853 GE Dishwasher Arm Spray Middle Assembly
Tools Needed:
• Screwdriver
• WD22X22853 GE Dishwasher Arm Spray Middle Assembly
Instructions:
1. Shut off the power to your dishwasher by unplugging it or flipping the power switch off.
2. Open the dishwasher door and locate the three screws on the frame of the inside of the dishwasher.
3. Loosen the screws and remove the spray arm from the dishwasher.
4. Unscrew any additional screws that may be securing the middle spray arm assembly to the spray arm or dishwasher body.
5. Unscrew the hose clamp at the base of the spray arm assembly and remove the old spray arm assembly.
6. Install the new WD22X22853 GE Dishwasher Arm Spray Middle Assembly onto the dishwasher spray arm.
7. Secure the spray arm assembly with the hose clamp and any screws that were removed earlier.
8. Reattach the arm to the dishwasher frame and secure with the three screws.
9. Plug in the dishwasher or turn on the power switch and test to make sure the spray arm spins freely.
10. If everything is functioning properly, close the door and enjoy your fixed dishwasher!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Tools Needed:
• Screwdriver
• WD22X22853 GE Dishwasher Arm Spray Middle Assembly
Instructions:
1. Shut off the power to your dishwasher by unplugging it or flipping the power switch off.
2. Open the dishwasher door and locate the three screws on the frame of the inside of the dishwasher.
3. Loosen the screws and remove the spray arm from the dishwasher.
4. Unscrew any additional screws that may be securing the middle spray arm assembly to the spray arm or dishwasher body.
5. Unscrew the hose clamp at the base of the spray arm assembly and remove the old spray arm assembly.
6. Install the new WD22X22853 GE Dishwasher Arm Spray Middle Assembly onto the dishwasher spray arm.
7. Secure the spray arm assembly with the hose clamp and any screws that were removed earlier.
8. Reattach the arm to the dishwasher frame and secure with the three screws.
9. Plug in the dishwasher or turn on the power switch and test to make sure the spray arm spins freely.
10. If everything is functioning properly, close the door and enjoy your fixed dishwasher!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.