WD21X25696 GE Dishwasher Fuse
The GE WD21X25696 CONTROL BOARD FUSE 4.1 AMP is a must-have for any appliance repair professional. This genuine OEM fuse allows for the proper electronic function of your microwave or other appliance. Easy to install, the fuse is rated at 4.1A and has an integrated thermal shutoff switch for extra protection. It's a quick and easy way to breathe new life into your appliances. Get the reliable protection you need with the GE WD21X25696 CONTROL BOARD FUSE 4.1 AMP! We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.0552 lbs
Dimension : 5.5511 x 1.8503 x 0.748
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The GE WD21X25696 CONTROL BOARD FUSE 4.1 AMP is a must-have for any appliance repair professional. This genuine OEM fuse allows for the proper electronic function of your microwave or other appliance. Easy to install, the fuse is rated at 4.1A and has an integrated thermal shutoff switch for extra protection. It's a quick and easy way to breathe new life into your appliances. Get the reliable protection you need with the GE WD21X25696 CONTROL BOARD FUSE 4.1 AMP! We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.0552 lbs
Dimension : 5.5511 x 1.8503 x 0.748
Write Your Own Review
The following parts are replaced by this product
- WD21X24482
Step 1: Unplug the power cord to your GE WD21X25696 Control Board. Make sure to unplug for safety purposes before beginning to work.
Step 2: Remove the Control Board Fuse Cover. Locate the fuse near the power cord; it is usually on the back of the control board. With a Phillips Screwdriver, remove the cover by unfastening all the screws. After this process is complete, the cover should come off without difficulty.
Step 3: Take out the old fuse and replace it with a new 4.1 Amp Fuse. The 4.1 Amp Fuse is what is necessary to replace the old one. Carefully remove the old fuse from the fuse clamp and replace it with the new one.
Step 4: Reattach the Fuse Cover and Plug in the Power Cord. Once the new fuse is in place and secure, you can reinstall the fuse cover and fasten the screws with a Phillips screwdriver. Reconnect the power cord, and you are done!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Step 2: Remove the Control Board Fuse Cover. Locate the fuse near the power cord; it is usually on the back of the control board. With a Phillips Screwdriver, remove the cover by unfastening all the screws. After this process is complete, the cover should come off without difficulty.
Step 3: Take out the old fuse and replace it with a new 4.1 Amp Fuse. The 4.1 Amp Fuse is what is necessary to replace the old one. Carefully remove the old fuse from the fuse clamp and replace it with the new one.
Step 4: Reattach the Fuse Cover and Plug in the Power Cord. Once the new fuse is in place and secure, you can reinstall the fuse cover and fasten the screws with a Phillips screwdriver. Reconnect the power cord, and you are done!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
