WD12X22801 GE Dishwasher Dishrack Roller
The GE WD12X22801 RACK BRACKET with 3 WHEELS is designed to work perfectly with your dishwasher. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.6043 lbs
Dimension : 8 x 7.5 x 1.4
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
The GE WD12X22801 RACK BRACKET with 3 WHEELS is designed to work perfectly with your dishwasher. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Weight : 0.6043 lbs
Dimension : 8 x 7.5 x 1.4
Write Your Own Review
The following parts are replaced by this product
- WD12X10448
DIY Guide to Replacing a GE WD12X22801 Rack Bracket (3 Wheels)
Whether you’re dealing with a broken wheel or a damaged rack bracket on your GE WD12X22801 appliance, a replacement of the 3 wheels can help you get your appliance running smoothly and efficiently. Follow this easy DIY guide to replace the rack bracket and get your appliance back to its best.
Materials Needed:
- WD12X22801 rack bracket (3 wheels)
- 1/4-inch nut driver
- WD12X10155 roller axle
- Phillips screwdriver
Step 1: Unplug the appliance from the power source and remove the racks from the unit.
Step 2: Use a nut driver to remove the screws that attach the broken wheel or damaged rack bracket to the bottom of the appliance.
Step 3: Install the new WD12X22801 rack bracket by aligning the holes on the new part with the holes in the bottom of the appliance. Make sure the wheel is firmly seated in place.
Step 4: Reinstall the screws to secure the wheel in place.
Step 5: Attach the wheel axle and adjust it so that it fits snugly between the side rails of the rack bracket. Secure the wheel axle in place using a Phillips screwdriver.
Step 6: Test the wheel for smooth and consistent rotation before replacing the racks and plugging the appliance back in.
Congratulations! Your GE WD12X22801 is now ready to use after successfully replacing the rack bracket.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Whether you’re dealing with a broken wheel or a damaged rack bracket on your GE WD12X22801 appliance, a replacement of the 3 wheels can help you get your appliance running smoothly and efficiently. Follow this easy DIY guide to replace the rack bracket and get your appliance back to its best.
Materials Needed:
- WD12X22801 rack bracket (3 wheels)
- 1/4-inch nut driver
- WD12X10155 roller axle
- Phillips screwdriver
Step 1: Unplug the appliance from the power source and remove the racks from the unit.
Step 2: Use a nut driver to remove the screws that attach the broken wheel or damaged rack bracket to the bottom of the appliance.
Step 3: Install the new WD12X22801 rack bracket by aligning the holes on the new part with the holes in the bottom of the appliance. Make sure the wheel is firmly seated in place.
Step 4: Reinstall the screws to secure the wheel in place.
Step 5: Attach the wheel axle and adjust it so that it fits snugly between the side rails of the rack bracket. Secure the wheel axle in place using a Phillips screwdriver.
Step 6: Test the wheel for smooth and consistent rotation before replacing the racks and plugging the appliance back in.
Congratulations! Your GE WD12X22801 is now ready to use after successfully replacing the rack bracket.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
